Duerkopp Adler 911 Manual de instrucciones de montaje - Página 18

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Lector de códigos de barras Duerkopp Adler 911. Duerkopp Adler 911 20 páginas. Laser lamp
También para Duerkopp Adler 911: Manual de instrucciones de montaje (16 páginas), Manual de instrucciones de montaje (8 páginas), Manual de instrucciones de montaje (16 páginas)

Fitting Instruction for Remaining Thread Monitor

3.3 Operating and function sequence

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

Prerequisite:

The bobbin has to be inserted in the hook with the groove A

pointing downwards.

After the detection: "Bobbin almost empty, only certain residual

thread left":

The control panel will display the follwing: "Event code: 3220"

The request "Continue sewing" has to be confirmed with either

"OK" or "Cancel".

–

Selection "OK" (with a short segment to be sewn left):

The sewing program will be completed. After the thread

trimming the following message will appear on the display:

"Bobbin empty" / "Insert a full bobbin"

–

The regular bobbin change has to be carried out.

–

Selection "Cancel" (with long segments left to be sewn):

Thread trimming will occur; afterwards the control changes to

the repair mode.

–

The regular bobbin change has to be carried out.

–

Afterwards finish the seam segment left in repair mode.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 18 from 20