Anzzi Envo WH-AZ021-M3 Manual de instalación y funcionamiento - Página 13
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Calentador de agua Anzzi Envo WH-AZ021-M3. Anzzi Envo WH-AZ021-M3 20 páginas. Electric instant water heater
Imprimir página
INSTALLATION
Step 1:
Remove the bracket from the appliance
by loosing the screw in the middle of the
bottom.
Step 3:
If screw locations are not in stud. Drilling
three 0.24''(6mm) diameter holes on the
wall. Insert the plastic anchors into the
holes. If screw locations are in wall stud,
please skip to step 4.
Step 2:
1.Locate installation position for the water
heater.
2.Place the bracket on wall and use pencil
to mark screw hole locations. Make sure
the outlet and inlet pointed downward
vertically.
Step 4:
Place the bracket onto the wall and drive
mounting screws directly into stud or plastic
anchors to secure it.
PG.9