Dancover Crestline 2L Manual de instrucciones de montaje - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Tienda Dancover Crestline 2L. Dancover Crestline 2L 6 páginas. Camping tent

Crestline 2

1. Lay out the 'inner' tent flat on the ground, so that you are able to see the pole

sleeves. The poles are black. Insert into the relevant pole sleeves.

2. Assemble the poles and lay to one side.

3. Insert the poles into the correct pole sleeves to form the dome.

4. Position and secure.

5. Drape the flysheet over the dome and tie the ribbons to the poles (top and sides).

6. Insert the porch poles

7. Guy the tent.

8. Peg the tent into position.

Coleman tent - tips

Condensation:- Try not to leave damp items inside the tent. Make sure you make

use of the ventilation flaps at the bottom of the tent, also those at high level.

Tension:- Check if zips run smoothly, if not try releasing some tension from the end

guy ropes.

Cleaning:- Dirt can be removed by brushing softly or rubbing with a soft soap

solution. Detergents cannot be used as these can effect the water-repellent effect of

the fabric. Rinse all traces of soap well and dry off the tent.

Packing/Storage:- Remove all poles. Lay the tent flat on the ground and fold in half

making sure no air is trapped inside the tent.

If you remove the air it will make the tent easier to be inserted into the carry bag.

Fold flysheet in half in the opposite direction. Fold in half again until the width and

length are the same as the carry bag. Ensure that the poles are kept separate from

the tent. This should now fit into the carry bag.

If the tent is transported ''wet'' from the campsite, spread the tent out when you get

home and allow it to dry before storing.

Revised 5/1/6