Dancover Multipavillon 6x9m Manual - Página 4

Navegue en línea o descargue pdf Manual para Tienda Dancover Multipavillon 6x9m. Dancover Multipavillon 6x9m 5 páginas. Marquee

Place the 16 corner bases (1) as shown on drawing so

they form a frame measuring 6x9 m.

If the marquee is mounted outside use ground pegs

(8) inserted into the ground with a hammer.

If the marquee is mounted on a concrete or wooden

floor, the corner base can be fastened with concrete

nails or screws.

Fasten only one corner until the entire frame has

been assembled in order to ensure that the other

corner bases are placed correctly within the square.

Place the longest tubes (2) in the 2 outermost holes

in each corner base and the shorter tube (4) in the

middle hole. Mount the tubes so the snap-and-click

features points upwards.

Mount the tubes (2) in (3) for a complete arch.

Mount the connector (5) with the middle tube (4).

Mount the horizontal tubes (3) with the connectors

(5) to make a ring.

Assemble and mount the top section consisting of (9)

and (7).

Now you can fasten the remaining corner bases if

necessary.

Finally, mount to cover onto the frame. Fasten the 4

straps at the ends of the cover to the 4 corner bases.