AOBOET Uhome-LFP 2400 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Almacenamiento AOBOET Uhome-LFP 2400. AOBOET Uhome-LFP 2400 2 páginas.

Quick Installation Guide

Model:Uhome-LFP 2400

1.Wall mounting

1.Determine bracket mounting place to be

fixed using this Positioning cardboard.

3.Fasten the battery to bracket fasten hole

with M6 screws with 2.0N·m roughly.

Note:

If more than 4 batteries installed, a cabinet recommended to be selected for

the battery's stable.

2.Ground installation

1.Fix the braced feet to battery's mounting

holes one by one.

2.If more power and energy needed, two or

more (less than 4) batteries could be installed

in one stack.

AOBOET

2.Drill holes in the wall for the M8 expansion

screw anchors, which depth should be at least

50 mm. Tighten the screws to a torque around

2.5 N·m.

4.Meanwhile, two or four batteries could be

installed by theses brackets.

3.But if the number of batteries at the range

of 4~8, a cabinet recommended to be selected.

3.Address select of Master and Slave battery(ies)

connection

Step 1

Step 2

Step 1 ：Check dips SW1,4 and 5 are set as the diagram above.

Step 2 ：Set Dips SW2 and SW3 as the settings below.

Step 3 ： Check the cable connections are as Section 4.