Aobosi YVS-102 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Electrodomésticos de cocina Aobosi YVS-102. Aobosi YVS-102 19 páginas. Vacuum food sealer

11. Please do not place near the gas furnace and

heat dissipation items.

12. When not used for a long time or in summer

thunder season, please take out the power plug.

13. Do not use more than one electrical equipment

on one socket.

14. To reduce the risk of electric shock, this product

has a polarized plug (one blade is wider than the

other). This plug is intended to fit in a polarized

outlet only one way. When the plug does not fit

fully in the outlet, reverse the plug. When it still

does not fit, contact a qualified electrician to install

the proper outlet. Do not change the plug in any way.

15. WARNING--To Reduce The Risk Of Electric Shock

And Injury To Persons, Disconnect From Power

Supply Before Servicing.

16.

A short power-supply cord (or short detachable

power-supply cord) is provided to reduce the risks

resulting from becoming entangled in or tripping

over a longer cord.

17.

Extension cords (or longer detachable power-supply

cords) are available and are not prohibited from being

used when care is exercised in their use.

1)The marked electrical rating of the detachable

power-supply cord or extension cord shall be no

less than the marked electrical rating of the product;

2)When the product is of the grounded type, the

extension cord shall be a grounding type 3-wire cord;

3)The longer cord shall be arranged so that it does not

drape over the counter-top or tabletop where it is

capable of being tripped over, snagged, or pulled on

unintentionally, especially by children.

Our vacuum sealer has overheat protection by NTC

18.

sensor. If consumers continuously use Vacuum & Seal

or Seal only function for around 8 to 12 times and

machine inside temperature reaches 85°C, overheat

protection may be initiated to stop the machine from

operation, and LED lights in control panel will flash

repeatly until the machine cools down (which will take

about 3 to 5 minutes). When LED lights stop flash,

you may start to use the machine again.