Airvent Mixflow ECIF50W-150 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Ventilador Airvent Mixflow ECIF50W-150. Airvent Mixflow ECIF50W-150 2 páginas.

Imprimir página

PRODUCT SPECIFICATIONS

225mm

315mm

249mm

330mm

Model

Height

Width

Length

ECIF40W-150

208.5mm

225mm

315mm

ECIF50W-150

208.5mm

225mm

315mm

ECIF40W-150T

208.5mm

225mm

315mm

ECIF50W-150T

208.5mm

225mm

315mm

ECIF200-PRO

233.8mm

249mm

330mm

ECIF200-MAX

81mm

100mm

Pre-drill

Spigot

Junction

Run On

hole

Weight

Diamete

Box

Timer

Distance

148

81mm

60mm

2.3kg

148

81mm

60mm

2.3kg

1-60mins

148

81mm

60mm

2.53kg

148

81mm

60mm

2.53kg

1-60mins

196

100mm

80mm

3.62kg

Ext.

Mixflow Inline Fan

EC Greenline series

Owner's Manual

ECIF40W-150 / ECIF40W-150T

ECIF50W-150 / ECIF50W-150T

ECIF200-PRO/ ECIF200-MAX

OWNER'S MANUAL

This manual focuses on the safety precautions in the installation, and the use and maintenance of the

product. It is important that these installation and maintenance instruction are fully adhered to, be sure to

read this manual carefully before installing and using this product.

WARNING

• All electrical installations must be carried out by suitably qualified and competent personnel in accordance

with all statutory requirements.

• The fan is designed for use in an ambient temperature of up to 40-degree. It is not suitable for corrosive or

explosive atmospheres.

• The installer should provide easy access to the fan to facilitate future maintenance and ensure that the fan

is adequately supported.

• This product is not intended for use by persons (including children) with reduced physical sensory or

mental capabilities or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the product by a person responsible for their safety. Children should be

supervised to ensure that they do not play with the product.

• Precautions must be taken to avoid back-flow of gases into the room from the open flue of gas or other fuel

burning appliances.

• A minimum of one (1) metre of duct is to be fitted to the fan inlet and discharge spigots.