cascade corporation A Series Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Posicionadores de válvulas cascade corporation A Series. cascade corporation A Series 18 páginas.

Imprimir página
I
NSTALLATION
12
Adjust forks for equal movement
(if required)
NOTE: Attachment is Factory-adjusted for equal
fork movement when operated at recommended
pressure and flow rate.
A
Locate flow restrictors on right hand cylinder
(only one (1) flow restrictor used).
B
Open forks fully, then close. Look for unequal
fork movement.
C
Loosen restrictor jam nut and adjust untill
right hand fork moves equally with left hand
fork. Tighten jam nut.
13
Inspect fork hooks,
carriage bar clearance
NOTE: Use go/no-go Wear Gauge Part No. 209560
(Class II), 209561 (Class III) or 6104118 (Class IV).
A
Inspect the fork lower hooks and carriage bar.
If the gauge fits between the carriage bar and
lower hook, repair or replacement is needed.
B
Inspect the upper carriage bar. If the gauge
arrow touches the carriage bar, repair or
replacement is needed.
C
Inspect the fork upper hooks. If the gauge
arrow touches the hook, repair or replacement
is needed.
1849482-R2
FP0625.ill
Back (Driver's) View
FORK LOWER HOOKS, CARRIAGE
Wear
Gauge
OK
UPPER CARRIAGE BAR
OK
FORK UPPER HOOKS
OK
Flow
A
Restrictor
Fitting
FP0832.eps
11