DANFI AUDIO TE-2017 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Plato giratorio DANFI AUDIO TE-2017. DANFI AUDIO TE-2017 11 páginas. Bluetooth turntable with speakers
Imprimir página2. Unlock the tone arm from the holder as the illustrated above.
3. Place the record on the center spindle.
4. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter(3) to
the center spindle then place the record on it.
5. Slide the Speed selector (6) to 33 45 or 78 to match the play speed of the record.
Set the auto stop control (7) to ON if you want the turntable to stop turning when it has reached the
6.
end of the record. If the switch is set to OFF , the turntable will continue turning at the end of the
record.
7. Turn on the Power Switch (8) , it comes to Phono mode automatically , And the display (11) show
"-Pho". Pleas note the Switch also controls volume.
8. Raise the Lever (4) to raising the tone arm then move it to the top of the desired location of the record.
Release the Lever (4) to put the tone arm onto the record. Plays will auto start.
9. When finished playback, the unit will auto stop turning when Auto stop switch at " ON" position. If
Auto stop switch at "OFF' position, the turntable will continue turning at the end of the record.
10. Raise the Lever (4) to rising the Tone Arm then put it back to the Holder. Release the Lever then lock
the Tone Arm on the Holder.
Bluetooth function
(lift up the tone arm and put it on the rest)
For first time use or re-pairing to a new BT Device, pairing it as below:
Turn on the Power Switch (8), then press " M" button (16) till it enter into Bluetooth mode. The display
(11) shows " bt" .
Note: The display (11) shows "-Lod" when loading time .
Turn on the Bluetooth function of your device and enable the search or scan feature to find the
Bluetooth pairing name "TE-2017". (See y our device's instructions to add or setup a Bluetooth
device). Select "TE-2017" from the device list when it appears on your device screen. If required, enter
the pass code "0000" to pair (link) with your device.
It will has beep sound if connected successful, then you can play music from your Bluetooth device.
Press the Button
Press button
Adjust volume by volume control (8) or by your Bluetooth device.
Normal operation after paired:
Turn on the Power Switch (8), then press " M" button (16) till it enter into Bluetooth mode. The display
(11) shows " bt" .
Wait a few seconds until the unit auto paired to the external BT Device.
It will has beep sound if connected successful, then Plays the music in the paired BT Device as usual.
During playback, using the control buttons on the paired cell phone to skip the tracks; pause; play...etc.
USB/TF function ( U-disk in NTFS format is not supported, change to FAT32 or FAT format)
(lift up the tone arm and put it on the rest)
Turn on the Power Switch (8), and Insert your TF or USB card to slot (17) or (18). If USB or TF card
inserted before, press " M" button (16) till enter into USB or TF card mode.
The display (11) will show "-Lod", then it displays "USB" or "TF", music will begin.
Press the Button
(13) or
(15) to fast-forward or fast-backward.
Press button
Press and hold the button
to delete the current playing music.
Adjust volume by volume control (8).
FM function
(13) or
(15) to select previous or next track.
(14) to pause and play music.
(13) or
(15) to select previous or next track. Press and hold the Button
(14) to pause and play music.
(14) , the display will show "dEL", then press the button
(14) again