3Q 3Q-MG-F18 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Masaje 3Q 3Q-MG-F18. 3Q 3Q-MG-F18 4 páginas. 3q foot massager with heat

Imprimir página

Control Panel Instruction

1. Kneading: Toggles kneading function on and

off when in manual mode

2. Air Pressure: Switches between three levels

of air pressure when in manual mode

3. Auto: Selects between the two automatic modes

4. Heating: Adjust between low and high

temperature when in either mode

5. Power: Turns massager on and off

Operation Instruction

Plug output jack of adapter into power cord jack of the foot

massager then plug input jack of the adapter into an AC power

outlet. A flashing LED indicator and a buzzer indicates that the

massager is operational.

Automatic Working Mode

1. Press the power button and the massager will start up in

automatic mode A. The left indicator LED, Kneading LED and

air massage LEDs will be on.

The following functions will be enabled:

a.Combination of air pressure massage with kneading function

b.Air pressure massage function

c.Kneading Massage function

the three functions above will cycle for 15 minutes before

automatic shut down occurs.

2. Pressing the auto button again will change to automatic mode b.

The following functions will be enabled:

a. Air pressure massage function

b. Kneading massage function

c. Combination of air massage with kneading function

the three functions above will cycle for 15 minutes before

automatic shut down occurs.

Manual Working Mode

3. Pressing the auto button again will change to manual mode.

The following functions will be enabled:

a. Pressing the Kneading Button will toggle the kneading

function on and off

b. Pressing the Air Massage Button will select between three

intensity levels as indicated by the LED color (green, yellow,

red)

c. Pressing the Heat button will alternate between low and high

temperature

The massager's auto shutdown function will activate after

15 minutes. This will turn off the massager.

Product Maintenance and Attentions

1.Please do not massage the area on the foot where there is

trauma or ulceration.

2.To prevent overload of the massage, please don't stand on

it or sit on it.

3. For new users continuous use is not recommended. The time

should be increased after you have adapted to it.

4. A duration of 30 minutes or less per session is recommended.

Heat insensitive users should pay attention to the

surface of the application.