3rd Power DS $ '68 Plexi Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Amplificador 3rd Power DS $ '68 Plexi. 3rd Power DS $ '68 Plexi 17 páginas. Dream solo series 112 combo amplifiers & heads

Imprimir página

Back Panel:

Bias Adjustment

Your DREAM SOLO comes from the factory biased for 6V6 tubes. Bias adjust-

ments are not intended to be user-serviceable. Attempting to adjust the bias your-

self will expose you to very dangerous high-voltage electricity that can kill you.

Special test equipment and knowledge of amp circuits and tubes are required to

perform this function. DO NOT ATTEMPT TO DO THIS YOURSELF.

Tube Replacement

WE RECOMMEND TAKING YOUR AMPLIFIER TO A QUALIFIED

TECHNICIAN FOR SERVICING YOUR TUBES. Make certain the amplifier is

turned off and has been allowed ample time to cool down. Be very careful when

you remove the tubes as they might still be very hot! Do not touch tube sockets

with fingers! Even after turning your amp off and unplugging it from the power

outlet there could be enough voltage stored in the capacitors to give you a lethal

electrical shock.

WARNING:

• Do not remove the back panel.

• Do not attempt to check or replace tubes yourself. Refer to an authorized

service center.

• Never touch the tubes while the amplifier is turned on or has recently

been turned ON. You can severely burn your fingers and hands.