3S 6016 Manual

Navegue en línea o descargue pdf Manual para Bastidores y soportes 3S 6016. 3S 6016 2 páginas. Tripod/base mount

Warning: Do not use with mount pipe longer than 18"

1. FIRST TIME ASSEMBLY: Attach adjustment knob using the square nut and nut clamp. Turn

base upside down. Place nut inside nut clamp and drop into slot on bottom of base so that the

open side of the nut clamp is toward the flat side of the base. Screw in adjustment knob. Use

this knob to remove and re-tighten pipe mount for travel or storage.

2. Attach compass to base, secure level to base.

3. Attach rubber feet to support legs.

4. Insert spring clips into the support legs until locked in place.

5. Slide legs into base until locked in place.

MODEL 3S-6016 TRIPOD/BASE MOUNT

Square Nut and Nut Clamp

Support Leg

Rubber Foot

Adjustment Knob

Bubble Level

Spring Clip

18in Pipe Mount

Compass

Base

Elastic Cord

Anchor Screw