AOI UCS-Q1 Manual rápido del usuario

Navegue en línea o descargue pdf Manual rápido del usuario para Instrumentos de medida AOI UCS-Q1. AOI UCS-Q1 2 páginas.

Imprimir página

AOI UCS-Q1 Quick User Guide

Thank you for your purchase of AOI Ultra Compact Strobe Q1. Please read this

Quick User Guide prior to use. It will provide an overview of how the UCS-Q1

strobe can be used for optimal performance. For any additional information,

please consult your local dealer or write to

Battery Installation

Battery Polarity "+" must be a protruding type otherwise it will

cause contact failure.

Items Included in the package

UCS-Q1 Strobe

Strobe Diffuser

Battery Storage Case

(Batteries Not Included)

Silicone Grease (AOI SIGR-5)

Spare O-Rings x 2pcs for

Battery Compartment

- 1 -

Strobe Operation

a. Power ON

SEC.

b. Power OFF

SEC.

- 4 -

Names of the Parts

O-Ring Remover /

White Balance Card (AOI ORR-01)

Micro-Fiber Cleaning Cloth (AOI MC-01)

AOI Logo Sticker

Quick User Guide

- 2 -

c. Standby Mode

d. Auto Standby

Blue

Green

Blinking

Still

e. Auto Power OFF

f. LED Lights Control Button

- 5 -

Battery Cap

Button

Pressure Relief Valve

Indicator

LED Lights

Strobe Power Control Knob

Strobe Light Emitting Window

Fiber Optic Cable Port

1" Ball Mount

Indicator

When the Strobe Power Control Knob is at STBY position, the UCS-Q1 is in

Standby Mode. Strobe charging is suspended and flash cannot be triggered.

The LED lights can be operated.

If the Strobe Power Control Knob is not at STBY position and the strobe has not

been activated more than 15 minutes, UCS-Q1 will go into the Standby Mode

automatically. Operating any button, knob or strobe trigger will reset UCS-Q1

from Standby Mode.

If UCS-Q1 is not activated more than 2 hours, it will Power Off automatically. To

turn the strobe back on, the process of Power ON need to be repeated.

LED

25%

Lights Off

Power

When UCS-Q1 is Power ON, press

1 x

to switch through LED Lights modes.

-3 -

50%

100%

Power

Button

- 6 -