cashco D Manual de instalación, uso y mantenimiento - Página 6
Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Controlador cashco D. cashco D 10 páginas. Pressure reducing regulators
También para cashco D: Manual de instalación, uso y mantenimiento (9 páginas)
Imprimir página
4. Excessive pressure downstream.
Possible Causes
A.
Regulator not closing tightly.
B.
Downstream block.
C.
No pressure relief protection.
D.
Restricted diaphragm movement.
5. Sluggish operation.
Possible Causes
Plugged spring chamber vent.
A.
Plugged piston balance port.
B.
C.
Fluid too viscous.
VIII.
ORDERING INFORMATION
NEW REPLACEMENT UNIT vs PARTS "KIT" FOR FIELD REPAIR
To obtain a quotation or place an order, please retrieve the Serial Number and Product Code that was etched on
the metal name plate and attached to the unit. This information can also be found on the Bill of Material ("BOM"),
a parts list that is available upon request. (Serial Number is a 13 digit number on the nameplate). Product Code
typical format as follows: (last digit is alpha character that reflects revision level for the product).
NEW REPLACEMENT UNIT:
Contact your local Cashco, Inc., Sales Rep re sen-
ta tive with the Serial Number and Product code.
With this information they can provide a quotation
for a new unit including a complete description,
price and availability.
Do not attempt to alter the original construction
of any unit without assistance and approval from
the factory. All purposed changes will require a
new name plate with appropriate ratings and new
product code to accommodate the recommended
part(s) changes.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be
construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to
modify or improve the designs or specifications of such product at any time without notice.
Cashco, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any
Cashco, Inc. product remains solely with the purchaser.
6
A.
B.
C.
D.
A.
B.
C.
SECTION VIII
–
CAUTION
Inspect the seating. Clean and lap metal seat surfaces; replace if lapping does not rem-
edy. If composition seats are depressed, nicked or embedded with debris, replace trim.
Check system; isolate (block) flow at regulator inlet - not outlet. Relocate regulator if
necessary..
Install safety relief valve, or rupture disc.
Ensure no moisture in spring chamber at temperatures below freeze point. Ensure no
dust or debris entering vent opening. If rainwater or debris can enter, re-orient spring
chamber.
Clean vent opening.
Remove trim and clean balance port.
Heat fluid. Contact factory.
7
–
PARTS "KIT" for FIELD REPAIR:
Contact your local Cashco, Inc., Sales Rep re sen-
ta tive with the Serial Number and Product code.
Identify the parts and the quantity required to
repair the unit from the cut sheet available on the
following page.
NOTE: Those item numbers that have a quantity indicated
under "Spare Parts" in column "A" reflect minimum
parts required for inspection and rebuild, - "Soft
Goods Kit". Those in column "B" include minimum
trim replacement parts needed plus those "Soft
Goods" parts from column "A".
A Local Sales Representative will provide quotation
for appropriate Kit Number, Price and Availability.
Remedies
Remedies
IOM-D/DL