Danfoss VLT 5000 Series Manual de introducción - Página 6
Navegue en línea o descargue pdf Manual de introducción para Accionamientos de CC Danfoss VLT 5000 Series. Danfoss VLT 5000 Series 9 páginas. Frequency converter wobble function
También para Danfoss VLT 5000 Series: Manual (12 páginas), Instrucción (4 páginas), Manual de instrucciones (16 páginas)
Imprimir página
VLT 3000 Series
200 Frequency Range
201 Min. Frequency
203 Jog frequency
204 Digital Reference Type
205 Digital Reference 1
206 Digital Reference 2
207 Digital Reference 3
208 Digital Reference 4
209 Current Limit
210 Warning Frequency Low
211 Warning Frequency High
212 Warning Current Low
213 Warning Current High,
214 Ramp type
215 Ramp-Up Time
216 Ramp-Down Time
217 Alternative Ramp-Up Time
218 Alternative Ramp-Down Time
219 Frequency bypass 1
220 Frequency bypass 2
221 Frequency bypass 3
222 Frequency bypass 4
223 Frequency bypass, bandwidth
224 Carrier Frequency
225 Output Frequency Dependant Switch
Frequency
231 Brake Cut-In Frequency
232 Current, Minimum Value
233 Current, Delay Time
6
VLT
®
3000 to 5000 Converter
VLT 5000 series
200 Output Frequency Range/Direction
201 Output Frequency Low Limit
213 Jog frequency
214 Reference Function
215 Preset Reference 1
216 Preset Reference 2
217 Preset Reference 3
218 Preset Reference 4
221 Torque Limit in Motor Mode
Parameter 222, Torque limit in Generating
Operation, is set to the same value as parameter
221.
225 Warning: Low Frequency
226 Warning: High Frequency
223 Warning: Low Current
224 Warning: High Current
206 Ramp type
207 Ramp-Up Time 1
208 Ramp-Down Time 1
209 Ramp-Up Time 2
210 Ramp-Down Time 2
230 Frequency bypass 1
231 Frequency bypass 2
232 Frequency bypass 3
233 Frequency bypass 4
229 Frequency bypass, bandwidth
411 Switching Frequency
412 Output Frequency Dependant Switching
Frequency
225 Warning: Low Frequency.
This parameter is used for setting the level for
general warnings at too low frequencies. In
combination selection of "Mechanical Brake
Control" in parameter 323 and 326 the functionality
of this parameter is control of the cut-in frequency
for a mechanical brake
223 Warning: Low Current
120 Start Delay Time
MG.50.Q2.02 – VLT is a registered Danfoss trade mark