CashConcepts CCE 1810 Cash & Card Manual - Página 11
Navegue en línea o descargue pdf Manual para Validador de billetes CashConcepts CCE 1810 Cash & Card. CashConcepts CCE 1810 Cash & Card 14 páginas.
También para CashConcepts CCE 1810 Cash & Card: Manual abreviado (2 páginas)
Imprimir página
CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh
Setting the functions
You can adjust the CCE 1810 Cash & Card to your business needs as follows:
Output direction of the banknotes
Hold pressed the DIR / ▲▼ – button for around 2 seconds to change
the output direction of accepted banknotes. The banknotes can be
ejected either to the front or rear. Suspected banknotes are generally
ejected forward. The display shows the selected output direction
indicated by the two arrows on the left side of the display.
Single and total value
Press the CLR / MODE button shortly to switch between the ADD
function (adding up all accepted notes) and DEN function (display the
denomination of the last accepted bill).
The display will show by chosen option ADD "Value" in the upper
display and the total sum will be displayed. When selected DEN, you
get the message "Denomination" and the display shows the value of
the banknote. In general, the number of accepted banknotes is
displayed in the lower display area.
Currency display / currency selection
Manually selecting of the currency is not required. The CCE 1810 Cash
& Card recognizes the currency to be tested automatically when it is
installed. The standard software includeds Euro (EUR) - British Pound
(GBP) - Swiss Franc (CHF).
The detected currency is displayed in the left bottom of the screen.
Please note that not all currencies can be detected in all four
longitudinal directions. This is due to the position of the security
features on the banknotes, and can not be influenced by us. If a
banknote is not insert in the specified direction and / or position (e.g.
left side), the note is rejected as suspicious.
Sleep mode and reset the display
Sleep mode
If about 4 minutes no banknote is insert in the CCE 1810 Cash & Card, the device switches to power saving mode and turns off
the display. The blue LED on the ON / OFF button remains shining and indicates the readiness of the unit. If now a bill is inserted
into the device, it is automatically drawn in and the unit will return to the test mode.
Reset the display
If about 20 seconds, no banknote is insert in the CCE 1810 Cash & Card, the unit automatically clears the display, in both modes
(ADD and DEN). If you would like to clear the display manually, press and hold the CLR / MODE button for 2 seconds.
EN