AOM EAN-300 Especificaciones - Página 12

Navegue en línea o descargue pdf Especificaciones para Sistemas de filtración de agua AOM EAN-300. AOM EAN-300 20 páginas. Electrostatic filters
También para AOM EAN-300: Manual de instalación y mantenimiento (13 páginas)

Imprimir página

7.1.4

Building Code of Australia guidelines should be followed for all hanging and supporting of the equipment.

7.2

Delivery and handover

7.2.1

Delivery of the equipment will be completed once the full invoiced amount has been received by AOM.

7.2.2

Delivery of the equipment will be completed to the address as indicated by the Client and by means of the agreed

logistics.

7.2.3

Unless the client requests otherwise, the delivery will be ensured to the closest suitable access point, at which point

the handover of the equipment is complete.

7.2.4

Alternatively, the client can organise to have the product picked up at an AOM warehouse, at which point, hand over is

completed.

7.2.5

Unless otherwise mentioned, cost of delivery including freight and any additional handling costs (including crating),

are not included in the AOM quoted price and will need to be organised once a delivery address is provided.

7.2.6

The equipment will be delivered at the agreed delivery date and following on from AOM Australia quality control

testing on the equipment.

7.3

Receiving

7.3.1

Upon receiving the product, check to ensure all items are accounted for by referencing the delivery receipt or packing

list.

7.3.2

Inspect each crate or carton for shipping damage before accepting delivery. Alert the carrier of any damage detected.

The customer will make a notation of damage (or shortage of items) on the delivery receipt and all copies of the bill of

lading which is countersigned by the delivering carrier.

7.3.3

If damaged, immediately contact your AOM Representative. Any physical damage to the Electostatic Precipitator

after acceptance is not the responsibility of AOM.

7.4

Unpacking

7.4.1

Verify that all required parts and the correct quantity of each item have been received.

7.4.2

If any items are missing, report shortages to your local Representative to arrange for obtaining missing parts.

7.4.3

Confirmation of shipment(s) must be limited to only items on the packing list.

7.5

Storage

7.5.1

Units are protected against damage during shipment. If the unit cannot be installed and operated immediately,

precaution needs to be taken to prevent deterioration of the unit during storage.

7.5.2

The user assumes responsibility of the unit and accessories while in storage. AOM will not be responsible for damages

during storage.

7.5.3

The ideal environment for storage of the Electrostatic Precipitator is indoors, above grade, in a clean, dry atmosphere

that is sealed from the elements. While in storage, inspect the equipment routinely and eliminate any possible sources

of moisture, dirt or other accumulations.

21/54 Beach Street Kogarah NSW 2217 Tel Sales 1300 903 788 Service 1300 904 088

rev 1, 22/09/2016

AOM AUSTRALIA