Duncan Twin Tube Classic SFX-03 Manual rápido - Página 7
Navegue en línea o descargue pdf Manual rápido para Pedal de música Duncan Twin Tube Classic SFX-03. Duncan Twin Tube Classic SFX-03 13 páginas. Two channel tube overdrive / distortion pedal
Imprimir página
Basic Operation
The ¼" mono instrument cable that leaves your guitarʼs jack plugs into the Twin
Tube Classicʼs jack marked "Input." The cable that exits from the "Output" jack on
the Twin Tube Classic goes to the next effect in the signal chain, or to the amplifier.
When first activating the Twin Tube Classic, start with the Rhythm Channel Volume
and Gain control knobs in the full counter-clockwise position. Then, start rotating
the knobs clockwise until the desired volume level and overdrive are achieved.
Next, with the Lead Channel Volume and Gain control knobs in the full counter-
clockwise position, depress the Channel Selector switch. This mutes the Rhythm
Channel and activates the Lead Channel. As with the Rhythm Channel, start
rotating the knobs clockwise until the desired volume level and distortion are
achieved, relative to the Rhythm Channel and to the bypassed sound of the Twin
Tube Classic.
Experiment with different Volume and Gain settings. Some of the coolest tones
are achieved with a little discovery. Because of the Twin Tube Classicʼs incredible
amount of gain and distortion in the Lead Channel, be aware that extreme settings
can result in uncontrollable feedback. And, as always, musicians and audience
members are best advised to use ear protection when exposed to loud volume.
Here are some sample settings to get your started:
Classic/Straight-Ahead Rock n' Roll Tone
Three Channel Setup
Channel #1: (Bypass mode) Amplifierʼs clean tone.
Channel #2: Twin Tube Classic rhythm channel (dirty rhythm).
Channel #3: Twin Tube Classic lead channel (dirty lead tone)
Tone
bass
treble
Rhythm
vol
gain
Lead
vol
gain
7