Aethra THESEUS Manual de inicio rápido
Navegue en línea o descargue pdf Manual de inicio rápido para Teléfono Aethra THESEUS. Aethra THESEUS 2 páginas. Aethra theseus videophone: specifications
También para Aethra THESEUS: Especificaciones (2 páginas)
Imprimir páginaStep 7. Network Setup
ISDN Configuration
In order select the icons:
"menu"
"settings"
"installation"
"network interface"
"isdn"
In this section :
·Select the protocol "Euro" or "National".
·Move to the icon Configure Access and press OK.
Access configuration (ISDN BRI National)
Number: enter the number associated
with ISDN access.
Step 8. How to make a call
ISDN calls.
1
From the main interface, lift the handset or press the
"HANDSFREE" button.
2
Dial the number to call using the numeric buttons
on the keypad
3
To end the call in HANDSFREE mode, press
the corresponding button.
IP calls.
1 From the main interface, lift the handset or press the
"HANDSFREE" button.
2 Enter the IP address of the terminal to be called using
the videophone's numeric keypad.
3 To end the call in HANDSFREE mode, press
the corresponding button.
© Aethra Telecomunicazioni - All rights reserved
We reserve the right to modify the technical specification
IP Configuration
The default setting is Automatic IP Address
For manual LAN configuration contact
the network administrator
HOW TO MAKE A CALL
1
Select the call type (ISDN or IP).
2
Select the call rate.
HOW TO RECEIVE A CALL
Take the handset or press handfree button
.
QUICK START GUIDE
Installing The Theseus is simple and easy. For easier installation follow the step-by-step
procedure below
Step 1. UNPACKING THE BOX
Remove The Theseus and accessories from packing. Make sure that all the
parts shown in the figure are present
THESEUS
THESEUS
VIDEOPHONE
AUDIO
HANDSET
Step 2. Handset Installation
The THESEUS guarantees optimum reproduction and
transmission of sound in handsfree mode. The telephone
receiver is intended for users who require private
communications.
The system is designed for handsfree operation. The
handset is for
users who desire private conversation.
1:
Thread the CABLE D through the hole in the
BRACKET B (fig.1)
2:
Lock the FIXING BRACKET B to the HANDSET
SUPPORT A, by sliding the BRACKET in the
direction of the arrows. (fig.2)
3:
Lock the group to the BASE C. (fig.3)
4:
Connect the CABLE plug D to the BASE C and fix
the cable as in the figure. (fig.4)
5:
Connect the SPIRAL CABLE to
the Handset
support.
.
.
ISDN CABLE
POWER SUPPLY
LAN CABLE
MANUALS
D
FIG.1
FIG.2
FIG.4
VIDEO
BRACKET
HANDSET
C
FIG.3