Casio 1590 Manual general - Página 2

Navegue en línea o descargue pdf Manual general para Ver Casio 1590. Casio 1590 3 páginas. Module

Imprimir página

To clear voice memory contents

In the Voice Mode or Timekeeping Mode, hold down D for about three seconds until the

watch beeps.

• This operation clears all data in voice memory. Note that you cannot clear data in a

specific area.

• The message

{CLEAR

remains on the display for about four seconds as voice

memory contents are being cleared. You cannot perform a record operation while the

{CLEAR

message is on the display.

• The watch returns to the mode you were in when you started the memory clear opera-

tion after all memory contents are cleared.

• If voice memory contents are being used for a voice alarm, the messages

and

{ALARM

alternate in the upper part of the display to indicate that the voice

alarm is also being cancelled.

TELEMEMO MODE

Mode indicator

Number of

telememo

items stored

MEMO

Name

MEMO

Remaining

memory

Telephone number

To input new Telememo data

1. In the Telememo Mode, press D to display the new data

Text area

Cursor

display.

• The new data display is the one that is blank (contains no

name and telephone number).

MEMO

• If there is no Telememo data stored in memory yet, the

new data display appears as soon as you enter the

Telememo Mode.

2. Hold down A until the flashing cursor appears in the text

area.

3. Use D and B to change the character at the cursor

Number area

position in the text area. The character changes in the

[New Data Display]

following sequence.

Press D

(space)

• Holding down either button changes the character at high speed.

4. When the character you want is at the cursor position, press C to move the cursor to

the right.

5. Repeat the steps 3 and 4 until your text is complete.

• You can input up to eight characters in the text area.

6. After you input a name, use C to move the cursor to the number area.

• The text area can hold up to eight characters. When the cursor is located at the eighth

space of the text area, moving the cursor to the right causes it to jump down to the first

digit in the number area. When the cursor is at the 12th digit of the number area,

moving it to the right causes it to jump back up to the first character of the text area.

7. Use D and B to change the character (hyphen, number, or space) at the cursor

position in the number area. The character changes in the following sequence.

PressD

PressB

• Holding down either button changes the character at high speed.

8. When the character you want is at the cursor position, press C to move the cursor to

the right.

9. Repeat steps 7 and 8 until you complete number input.

• You can input up to 12 digits in the number area.

• After you input data, you can return to the new data display for input of more that by

pressing E or F. Next, continue from step 3.

10.After inputting your data, press A to store it and return to the Telememo Mode.

• When you press A to store data, the message

few seconds. After the sort operation is complete, the normal Telememo Mode display

(without the cursor) appears.

• The text area of the display can show only six characters at a time, so longer text

scrolls continuously from right to left.

Continuously scrolls

Text area

Last letter of text

• If the message

{FULL

appears in the text area of the display, it means that memory

is full. To store more data, you will first have to delete some of the data stored in

memory.

• If you do not perform any button operation for a few minutes while the cursor is on the

display, the watch automatically returns to the normal Telememo Mode (without the

cursor).

The Telememo Mode lets you store up to 30 pairs

of name and telephone number data. Data is au-

tomatically sorted based on the characters of the

name. You can recall data by scrolling through it

on the display.

• See the "CHARACTER LIST" for details on how

the watch sorts data.

• The data item on the display when you exit the

Telememo Mode appears first the next time you

enter the Telememo Mode.

• If you do not operate any button for a few min-

utes while in the Telememo Mode, the watch

automatically goes back to the Timekeeping

Mode.

Press B

(space)

0 to 9

SORT

appears on the display for a

Separator (inserted automatically)

To recall Telememo data

In the Telememo Mode, press F to scroll forward through stored data items or E to

scroll in reverse.

• Holding down either button scrolls through the data at high speed.

To edit Telememo data items

1. In the Telememo Mode, scroll through the data items and display the one you want to

edit.

2. Hold down A until the flashing cursor appears in the text area.

3. Use C to move the cursor to the character you want to change.

{CLEAR

4. Use B and D to change the character.

• For details on inputting characters, see "To input new Telememo data" (steps 3 for

name input and 7 for number).

5. After making the changes that you want, press A to store it and return to the Telememo

Mode.

To delete Telememo data

1. In the Telememo Mode, scroll through the data items and display the one you want to

delete.

2. Hold down A until the flashing cursor appears in the text area.

3. Press B and D at the same time to delete the data item.

• At this time the cursor appears in the text area, ready for input.

4. Input data or press A to return to the Telememo Mode.

Alarm on indicator

Mode indicator

MEMO

Hour : Minutes

Alarm Types

The types of alarm you get depends on the information you set.

• To set a Daily Alarm

Set the hour and minutes for the alarm time. Set

(see step 4 under "To set alarms"). This type of setting causes the alarm to sound every

day at the time you set.

• To set a Date Alarm

Set the month, date, hour and minutes for the alarm time. This type of setting causes the

alarm to sound at the specific time, on the specific date you set.

• To set a 1-Month Alarm

Set the month, hour and minutes for the alarm time. Set

under "To set alarms"). This type of setting causes the alarm to sound every day at the

time you set, only during the month you set.

• To set a Monthly Alarm

Set the date, hour and minutes for the alarm time. Set

"To set alarms"). This type of setting causes the alarm to sound every month at the time

you set, on the date you set.

To set alarms

1. Press D while in the Alarm Mode to select Alarm 1 through Alarm 5.

2. After you select an alarm, hold down A until the hour digits flash on the display. The

hour digits flash because they are selected .

• At this time, the alarm is automatically turned on.

3. Press C to change the selection in the following sequence.

4. Press D to increase the selected digits and B to decrease them. Holding down

either button changes the selection at high speed.

• To set an alarm that does not include a month (daily alarm, monthly alarm), set

the month. Press D or B until the

month digits are flashing.

• To set an alarm that does not include date (daily alarm, 1-month alarm), set

date. Press D or B until the

digits are flashing.

• The format (12-hour and 24-hour) of the alarm time matches the format you select for

normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time cor-

rectly as morning (no indicator) or afternoon P.

5. After you set the alarm, press A to return to the Alarm Mode.

ALARM MODE

You can set five independent alarms with hour, minutes,

month, and date. When the alarm is on, the alarm sounds

Month – Date

at the preset time. Press any button to stop the alarm after

it starts to sound.

When the hourly time signal is on, the watch beeps every

hour on the hour.

• You can use voice memory contents as your alarm sound.

• If you do not operate any button for a few minutes while in

the Alarm Mode, the watch automatically goes back to the

Timekeeping Mode.

Alarm No.

Alarm 2

Alarm 1

Hourly Time Signal

Hour

Minutes

mark appears (between 12 and 1) while the

mark appears (between 31 and 1) while the date

1590-2

for the month and

for the date

for the date (see step 4

for the month (see step 4 under

Alarm 3

Alarm 4

Alarm 5

Month

Date

for

for the