Danfoss VLT5000FLUX Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Accionamientos de CC Danfoss VLT5000FLUX. Danfoss VLT5000FLUX 16 páginas.

For the final installation of the duct work, as-

semble the top duct as shown in Photos 12, 13

and 14. Gasket is applied to several surfaces

as shown (refer to drawing 175R5631 Sheet 2,

exploded view of components). The top duct

closing plate is left off for the installation of the

duct work on the drive. The top duct work is

attached to the drive using existing holes on

the top cover of the drive. Use the 5 longer

screws (supplied with kit) to install the top duct

work.

The duct work will fit over the drive

mounting bolts.

Once the duct work is attached to the drive, the

duct closing plate can be attached. The top

duct work assembly is complete.

Photo 15. Gasket folds over the edge to

form seal between the duct and top vented

cover

Photo 16. Top duct installed

Instruction No: 175R5640 V3

Photo 12. Top duct assembled with gas-

ket

Photo 13. Gasket applied to both sides

drive bracket and grated cover

Photo 14. Top duct ready to be installed

on drive

Aug 13, 2008

Page 6

Closing plate