Casio 2220 Manual - Página 2

Navegue en línea o descargue pdf Manual para Ver Casio 2220. Casio 2220 9 páginas. Casio wrist camera watch manual

Imprimir página
Press D to change from mode to mode.
Timekeeping Mode
FRI
3‰
P
1 ‰ : 5 8
3 5
Press D.
L
VISUAL DATABANK Mode
Use this mode to
PLAY
view images in
watch memory,
3 ‰
to delete images,
to attach text to
images, etc.
L
Alarm Mode
AL1
A
1 2 : ‰ ‰
OFF

CAMERA MODE

Use the Camera Mode to record images. The
Lens
lens for image recording is located on the top
edge of the watch.
To record an image
1. Press F to enter the Camera Mode.
• Note that you cannot enter the Camera
FRI
3‰
Mode from the IR Mode.
P
1 ‰ : 5 8
3 5
• The Camera Mode screen first shows remaining memory capacity for
about one second, followed by the image being picked up by the lens.
REC
7 ‰
Remaining
memory
capacity
(number of
images)
2. While viewing the image on the display, point the lens of the watch at the
subject whose image you want to record.
3. Press F to release the shutter and record the image.
• This records the image currently on the display and stores it into memory.
The image remains on the display for about two seconds as the record
operation is being performed.

GENERAL GUIDE

IR Mode
IR
COM
L
Stopwatch Mode
STW
‰H
‰ ‰ ' ‰ ‰
0 0
L
Countdown Alarm Mode
TMR
3 ' ‰ ‰
Timekeeping Mode
• Pressing B or E while in the Timekeeping Mode displays the Viewer
Screen, which you can use to view images stored in watch memory.
Press B or E.
FRI
3‰
P
1 ‰ : 5 8
3 5
Press D to return from the Viewer Screen to the Timekeeping Mode.
• Each press of C while in the Timekeeping Mode toggles between the
Day of the Week Screen and the Month Screen.
Day of the week
Day
FRI
3‰
P
1 ‰ : 5 8
3 5
Camera Mode
• Pressing F in any mode besides the IR Mode enters the
Camera Mode.
FRI
3‰
P
Press
1 ‰ : 5 8
F.
3 5
• Pressing D while in the Camera Mode enters the VISUAL
DATABANK Mode so you can view images you have just
recorded.
Note
• All watch button operations are disabled while the record operation is in
progress.
• The watch stays in the Camera Mode for about one minute after you
enter it. Then it automatically enters the VISUAL DATABANK Mode
and displays the last image recorded. See "Camera Rest Interval" for
more information.
• The message FULL appears on the display to indicate that memory is full.
You will not be able to enter the Camera Mode while this message is
displayed. If this happens, delete images you no longer need to make
room for more images.
Camera Mode Precautions
General
• Never touch the surface of the lens with your fingers.
• Take care that you do not accidentally move the watch when you press F
to release the shutter.
• Insufficient lighting can result in poor images. Shoot in daylight whenever
possible. At night, shoot indoors in a well-lit area.
Camera Rest Interval
Camera Mode operations consume considerable battery power. To protect
against premature rundown of its battery, the watch automatically goes into a
rest interval, during which you will be unable to re-enter the Camera Mode
after you exit it. The length of the rest interval is equal to the amount of time
you spent in the Camera Mode before you exited it. This means that if you
exit the Camera Mode after being in it for 20 seconds, you will be unable to
re-enter the Camera Mode for about 20 seconds.
If you try to enter the Camera Mode during a
rest interval, the message WAIT appears on
REC
the display, along with a countdown of the
remaining rest interval time.
WAIT
• The maximum rest interval is 60 seconds.
18
Remaining rest
interval time
Alarm, Hourly Time Signal, Countdown Alarm Sounds
The watch does not emit any alarm, Hourly Time Signal, or Countdown Alarm
sound while it is in the Camera Mode.
2220-2
Press D.
Month
Day
Press C.
6 - 3‰
P
1 ‰ : 5 8
3 5
Press C.
REC
7 ‰