Casio 2332 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Ver Casio 2332. Casio 2332 4 páginas.

Imprimir página

Changing the Exchange Rate

1. In the Currency Conversion Mode, hold down A until

the exchange rate starts to flash on the display.

2. Use the keypad to input the exchange rate you want to

use.

• Pressing B changes the exchange rate to 0.

3. Press A to return to the Currency Conversion Mode.

Changing the Operator

In the Currency Conversion Mode, press

operation symbol #) or

to select division (indicated by the operation symbol $)

for the conversion calculation.

• The operator you select remains in effect until you change it.

Performing a Currency Conversion

1. In the Currency Conversion Mode, use the keypad to input the value from which

you want to convert.

2. Press

to display the conversion result.

3. Press B to clear the conversion result.

• An

(error) indicator appears on the display when the result of a calculation

exceeds 8 digits. Press B to clear the error indicator.

• Take care you do not press

while a calculation result is displayed. Doing so

re-converts the results.

• The displayed decimal point is quite small. Look carefully when you are reading

values.

ALARM MODE

You can set a Daily Alarm that sounds at the same time

each day, while it is turned on. You can also turn on an

Hourly Time Signal that causes the watch to beep twice

every hour on the hour.

Setting the Alarm Time

1. In the Alarm Mode, hold down A until the left hour digit

of the alarm time starts to flash.

• This operation automatically turns on the Daily Alarm.

2. Use the keypad to input the alarm time.

Hour : Minutes

• The flashing selection automatically advances to the

Hourly time signal

right each time you input a number. You can also use B

on indicator

and C to move the flashing digit between the left hour,

Alarm on indicator

right hour, left minutes, and right minutes settings.

• The 12-hour/24-hour format of the alarm time matches

the format you select in the Timekeeping Mode.

• If you are using the 12-hour timekeeping format, press

and PM.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as am (A indicator) or pm (P indicator).

3. Press A to return to the alarm display screen.

Daily Alarm Operation

The alarm sounds at the preset time each day for about 20 seconds, or until you stop

it by pressing any button.

To test the alarm

Hold down B to sound the alarm.

Turning the Daily Alarm and Hourly Time Signal on and off

In the Alarm Mode, press B to cycle through the on and off settings as shown below.

[Alarm On indicator/Hourly Time Signal On indicator]

Alarm On

Alarm Off

Signal On

Signal Off

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed time, split

times, and two finishes. The range of the stopwatch is 59

minutes, 59.99 seconds.

(a) Elapsed Time

Start

(b) Split Time

Start

Minutes

Seconds

1/100 second

Start

to select multiplication (indicated by the

to toggle between AM

Alarm On

Alarm Off

Signal Off

Signal On

➤

Stop

Re-start

Stop

➤

Split

Split release

Stop

➤

Split

Stop

Split release

First runner

Second runner

Record time

finishes.

of second

Record time of

runner.

first runner.

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Display Function

Turning the Auto Display on

Hold down C for about three seconds until the watch beeps.

• Note that the Auto Display function cannot be performed while you are making settings.

Auto Return Features

• If you leave a screen with flashing a digit or a cursor on the display for two or three

minutes without performing any operation, the watch automatically saves anything

you have input up to that point and exits the setting screen.

• If you leave the watch in the Telememo or Alarm Mode for about two minutes without

performing any operation, it automatically changes to the Timekeeping Mode. The

watch also reverts to the Timekeeping Mode if you leave it in the Calculator, World

Time, or Currency Conversion Mode for about six or seven minutes without

performing any operation.

12-hour/24-hour Timekeeping

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

applied in the World Time and Alarm Modes.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 pm. The A (AM) indicator is shown from midnight

to 11:59 am.

• With the 24-hour format, times are indicated in the range of 0:00 to 23:59, without

indicator.

Initial Screens

When you enter the Timekeeping, Telememo, or World Time Mode, the data you were

viewing when you last exited the mode appears first.

Telememo Mode

In the Telememo Mode, up to five characters for the text field and up to eight digits for

the number field can be shown on the display at a time. Name data longer than five

characters automatically scrolls across the display from right to left. If number data is

longer than eight digits, the first eight digits alternate on the display with the remaining

digits.

[Name]

• A separator is inserted automatically between the last and first character or digit.

World Time Mode

• The current times in all World Time Mode cities are calculated in accordance with

the Greenwich Mean Time (GMT) differential for each city, based on the current

Home City time setting in the Timekeeping Mode.

• GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC) data.

• The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

Backlight Precautions

The backlight uses an EL (electro-luminescent) panel that causes the entire display to

glow for easy reading in the dark. In any mode (except for the Stopwatch Mode),

press L to illuminate the display for about one second.

• The electro-luminescent panel loses illuminating power after very long use.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The watch will emit an audible sound whenever the display is illuminated. It does not

indicate malfunction of the watch.

• The backlight automatically turns off whenever an alarm sounds.

• Leaving the backlight on for a long time or turning on the backlight while battery

power is low can cause the second hand of the watch to stop momentarily.

➤

Clear

➤

Clear

(space)

➤

Clear

REFERENCE

Auto Display function of this watch continually changes

the contents of the digital display. Note that you cannot

use any of the watch's other functions while the Auto

Display function is operating.

Turning the Auto Display off

Hold down C for about three seconds until the watch

beeps.

Continuously

Separator

[Number]

CHARACTER LIST

2332-3