Danfoss 103E5 Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Termostato Danfoss 103E5. Danfoss 103E5 2 páginas.

E. Running your Programme

Your 103E5 controls your hot water and central heating together, turning them on

and off at the same time.

To run the central heating and hot water programme press the SELECT button.

As you press the SELECT button the display will change between ON, OFF, ALLDAY

and AUTO. Select the option you require depending on your circumstances, time of

the year etc (Fig. 7).

•

AUTO = the heating and hot water come on and go off at the programmed

times

•

ON = the heating and hot water will remain on constantly

•

OFF = the heating and hot water will not come on

•

ALLDAY = the clock will turn the heating and hot water on at the first programmed

ON and will leave it on until your last programmed OFF.

F. Temporary User Overrides

Sometimes you may need to change the way you use your timeswitch temporarily, i.e

due to unusually cold weather.

The 103E5 has two convenient overrides which can be selected without affecting the

set programme. (Fig. 8)

+1HOUR

o Press the +1HOUR button once if you need an extra hour of operation.

I f the system is off it will come on for an hour. If it is already on it will add an extra hour

so the system stays on for an extra hour.

To cancel the override press +1HOUR again.

ADVANCE (only during AUTO mode)

o Press the ADVANCE button once to advance to the next programmed event.

If the system is on it will go off. If it is off it will come on. The set programme will

resume at the next programmed ON/OFF time.

To cancel the override press ADVANCE again.

Danfoss Randall Ltd

Ampthill Road

Bedford, MK42 9ER

Tel: 0845 1217 400

Fax: 0845 1217 515

Website: www.danfoss-randall.co.uk

Fig. 7

Fig. 8

Override

buttons

PROGRAMME