Casio 2568 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Ver Casio 2568. Casio 2568 5 páginas.
También para Casio 2568: Manual del usuario (5 páginas)

Imprimir página

To set the current time in the World Time Mode

1. In the World Time Mode, use D to select the city code

DST indicator

whose time you want to set.

2. After you select a city code, hold down A until the DST

on/off setting of the World time starts to flash, which

indicates the setting screen.

3. Use C to move the flashing in the sequence shown

below to select other settings.

DST on/off

4. When the setting you want to change is flashing, use B and D to change it as

described below.

To change this setting

Perform this button operation

Press D to toggle between Daylight Saving Time

(ON displayed) and standard time (OF displayed).

• The above operation toggles all World Time city

DST on/off

codes between Daylight Saving Time and Standard

Time.

Use D (+) and B (–) to change the setting.

Hour, Minutes

• While the settings are flashing on the display, pressing B and D at the same

time changes the DST on/off, hour, and minutes settings so they match the

Timekeeping Mode time.

• When setting the world time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

• The DST indicator appears on the display to indicate that Daylight Saving Time is

turned on in the World Time Mode.

• Note that you cannot make settings for individual city codes. Daylight Saving Time

(summer time) advances the time setting by one hour from Standard Time.

Remember that not all countries or even local areas use Daylight Saving Time.

To view the time in another city code

In the World Time Mode, press D to scroll city codes (time zones).

• For full information on city codes, see the "City Code Table".

Data Bank

The Data Bank Mode lets you store up to 30 records,

Remaining memory

each containing name and telephone number data.

Records are automatically sorted based on the characters

of the name. You can recall records by scrolling through

them on the display.

• The characters you can input for the name depend on

the language you select in the Timekeeping Mode. See

"To set the time and date" for more information.

Changing the language setting does not affect names

Name

that are already stored.

• See "Sort Table" for details on how the watch sorts

records.

• All of the operations in this section are performed in the

Data Bank Mode, which you enter by pressing C.

Telephone number

To create a new Data Bank record

1. In the Data Bank Mode, use D to display the new data

screen.

Name area

• To jump directly to the new data screen, press B and

D at the same time.

• If the new data screen does not appear when you

press D, it means that memory is full. To store

another record, you will first have to delete some of

the records stored in memory.

2. Hold down A until the flashing cursor (_) appears in

Number area

the name area of the display.

New Data Screen

3. In the name area, use B and D to cycle through

characters at the cursor position. The characters cycle

in the sequence shown below.

Press D.

(space)

(alphabet)

Press B.

• The above character sequence is for English input. See "Character List" for the

character sequences of other languages.

4. When the character you want is at the cursor position, press C to move the cursor

to the right.

5. Repeat steps 3 and 4 until the name is complete.

• You can input up to eight characters for the name.

6. After you input the name, press C as many times as necessary to move the cursor

to the number area.

• When the cursor is located at the eighth space of the name area, moving the

cursor to the right causes it to jump to the first digit of the number. When the

cursor is at the 16th digit of the number, moving it to the right (by pressing C)

causes it to jump to the first character in the name.

7. In the number area, use B and D to cycle through numbers and symbols

(hyphen, brackets, space) at the cursor position. The characters cycle in the

sequence shown below.

Press D.

0 to 9

Press B.

8. When the character you want is at the cursor position, press C to move the cursor

to the right.

9. Repeat steps 7 and 8 until you complete number input.

• You can input up to 16 digits for the number.

• The number initially contains all hyphens. You can leave the hyphens as they are

or replace them with numbers or other symbols (brackets, space).

USER'S GUIDE 2568

Hour

Minutes

(symbol)

(number)

[

]

(space)

10. Press A to store your data and return to the Data Bank record screen (without

the cursor).

• When you press A to store data, the name and number you input flash for about

one second as Data Bank records are sorted. After the sort operation is complete,

the Data Bank record screen appears.

• The name can show only three characters at a time, so longer text scrolls continuously

from right to left. The last character is indicated by the symbol

To recall Data Bank records

In the Data Bank Mode, use D to scroll through Data Bank records on the display.

To edit a Data Bank record

1. In the Data Bank Mode, use D to scroll through the records and display the one

you want to edit.

2. Hold down A until the flashing cursor appears on the display.

3. Use C to move the flashing to the character you want to change.

4. Use D (forward) and B (back) to change the character.

5. After making the changes that you want, press A to store them and return to the

Data Bank record screen.

To delete a Data Bank record

1. In the Data Bank Mode, use D to scroll through the records and display the one

you want to delete.

2. Hold down A until the flashing cursor appears on the display.

3. Press B and D at the same time to delete the record.

• The message CLR appears to indicate that the record is being deleted. After the

record is deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Data Bank record screen.

Alarms

You can set up to five independent multi-function alarms

Timekeeping

Alarm date

with hour, minutes, month, and day. When an alarm is

Mode time

(month – Day)

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms can be configured as a

snooze alarm or a one-time alarm, while the other four are

one-time alarms.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

• There are five alarms numbered 1 through 5. You can

Alarm number

configure Alarm 1 as a snooze alarm or a one-time

Alarm time

alarm. Alarms 2 through 5 can be used as one-time

(Hour : Minutes)

alarms only.

• Alarm settings (and Hourly Time Signal settings) are

available in the Alarm Mode, which you enter by

pressing C.

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set, only during the month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at the time you set, on the day you set.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

Alarm number

screens until the one whose time you want to set is

displayed.

Alarm1

Hourly Time

Signal

• Each of the five alarm screens has an alarm number.

The Hourly Time Signal screen does not have an

alarm number.

2. After you select an alarm, hold down A until the hour

setting of the alarm time starts to flash, which indicates

the setting screen.

• This operation automatically turns on the alarm.

3. Use C to move the flashing in the sequence shown below to select other settings.

Minutes

Hour

4. While a setting is flashing, use D (+) and B (–) to change it.

• To set an alarm that does not include a month (Daily alarm, Monthly alarm), set x

for the month. Use D and B until the x mark appears (between 12 and 1) while

month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xx

for the day. Use D and B until the xx mark appears (between the end of the

month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off or change it to a one-

time alarm.

• Pressing any button stops the alarm tone operation.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the alarm 1 setting screen

after it.

Alarm 2

Alarm 3

Alarm 5

Alarm 4

Month

Day