Danfoss DEVIreg 330 Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Termostato Danfoss DEVIreg 330. Danfoss DEVIreg 330 12 páginas. Electronic thermostat -10 to +10 c
También para Danfoss DEVIreg 330: Manual de instalación (12 páginas), Manual de instalación (12 páginas)
Imprimir página
DEVIreg™ 330 (+5 to +45°C)
Protection class
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have this
in mind if the sensor must be extended.
Installation Guide
Class II
86 x 36 x 58 mm
83 g
5