Danfoss Devireg 535 Puesta en marcha - Página 2

Navegue en línea o descargue pdf Puesta en marcha para Termostato Danfoss Devireg 535. Danfoss Devireg 535 2 páginas.

Setting the timer periods

The first period bar

indicating this is the morning period.

By pressing the l, the start time of

the period starts flashing. You can

change it with the arrow buttons

 in increments of 15 minutes.

Press the l to accept.

The second (day), third (evening) and

fourth (night) period bars are set as

mentioned above.

Setting the comfort temperature

By pressing the l, the preset comfort

temperature starts flashing.

You can change it with the arrow

buttons 

Press l to accept, then press 

Setting the set back temperature

(second and fourth period)

By pressing the l, the preset comfort

temperature starts flashing, normally

this is set to OFF.

You can change it with the arrow

buttons 

Press l to accept.

Then press the

small screwdriver or pencil.

Changing timer program

flashes

pinhole with a

To change the program:

Keep the l button pressed for 2

seconds.

The actual program starts to flash.

It is now possible to change the

program by using the buttons 

Press the l to accept.

P1 - Manual mode

On constantly 24 hours 7 days a week

at set temperature.

Set temperature - twice a day.

Set temperature all day.

Set temperature Monday - Friday

twice a day.

Saturday - Sunday all day.

Part no.: 001v01 28.06.10