Danfoss ECL Comfort 110 Manual del usuario, instalación y mantenimiento - Página 14
Navegue en línea o descargue pdf Manual del usuario, instalación y mantenimiento para Termostato Danfoss ECL Comfort 110. Danfoss ECL Comfort 110 19 páginas. Application 130
También para Danfoss ECL Comfort 110: Ficha de datos (8 páginas), Manual de instalación (8 páginas), Manual de montaje (8 páginas), Manual rápido (2 páginas), Manual rápido (2 páginas), Manual rápido (2 páginas)
Imprimir página
Electrical connections - 24 V a.c. - in general
* Optional connections for safety thermostat
Terminal
Description
20
Supply voltage 24 V a.c. - A1
21
Supply voltage 24 V a.c. - A2
22
Optional connections for safety thermostat
23
Optional connections for safety thermostat
24
M1
Actuator - open
25
M1
Actuator - close
26
M1
Actuator - A1
27
Not to be used
28
Not to be used
29
P1
Phase for circulation pump (relay R2)
30
P1
Relay R2
2
Wire cross section: 0.5 - 1.5 mm
Incorrect connection can damage the TRIAC outputs.
26
VI.KT.F2.02
Max. load
15 VA
15 VA
4 (2) A
© Danfoss 06/2008
DH-SMT/DK
Connecting the temperature sensors and the ECL BUS
Terminal
Description
1 and 2
Not to be used
3 and 4
S3
Flow temperature sensor
5 and 6
S4
Return temperature sensor
7
Not to be used
8 and 9
ECL BUS, connections for room panel /
remote control
10
Not to be used
11 and 12
Ext. override
Wire cross section for sensor connections:
2
0.4 - 0.75 mm
Total cable length: Max. 125 m (all sensors incl. the ECL BUS)
Cable lengths of more than 125 m may cause noise sensibility (EMC).
VI.KT.F2.02
DH-SMT/DK
Type (recomm.)
ESM-11 / ESMC / ESMU
ESM-11 / ESMC / ESMU
ECA 60 / 62
ECA 61 / 63
© Danfoss 06/2008
27