3.0 Choose your favorite display
Your favorite display is the display you have
chosen as the default display. The favorite
display will give you a quick overview of
the temperatures or units that you want to
monitor in general.
If the dial has not been activated for 20 min.,
the controller will revert to the overview
display you have chosen as favorite.
Heating circuit
Dependent on the chosen display, the
overview displays for the heating circuit
inform you about:
• actual outdoor temperature (-0.5)
• controller mode ( )
• actual room temperature (24.5)
• desired room temperature (20.7 °C)
• trend in outdoor temperature ( )
• min. and max. outdoor temperatures
since midnight (
)
• date (23.02.2010)
• time (7:43)
• comfort schedule of the current day
(0 - 12 - 24)
• state of the controlled components
(M2, P2)
• actual fl ow temperature (49 °C), (desired
fl ow temperature (31))
• return temperature (24 °C) (limitation
temperature (50))
DHW circuit
Dependent on chosen display, the overview
displays for the DHW circuit inform you
about:
• actual DHW temperature (50.3)
• controller mode ( )
• desired DHW temperature (50 °C)
• comfort schedule of the current day
(0 - 12 - 24)
• state of the controlled components
(M1, P1)
• actual DHW temperature (50 °C), (desired
DHW temperature (50))
• return temperature (- - °C) (limitation
temperature (30))
DEN-SMT/DK
6
Change between displays by turning the
dial until you reach the display selector
(
) at bottom right side of the display.
Turn the dial and push to choose your
favorite overview display.
Overview display 1:
Overview display 2:
Display selector
Overview display 3:
Overview display 4:
Overview display 1:
Overview display 2:
VI.KT.Y1.02
Danfoss District Energy
4.0 Setting temperatures
Depending on the chosen circuit and mode,
it is possible to enter all daily settings
directly in the overview displays.
Setting the desired room temperature
The desired room temperature can easily
be adjusted in the overview displays for the
heating circuit.
Action:
Purpose:
Examples:
Desired room temperature
20.5
Confi rm
Adjust the desired room
21.0
temperature
Confi rm
If you want to change the desired room
temperature for saving mode, choose the
mode selector and select saving mode.
Setting the desired DHW temperature
The desired DHW temperature can easily
be adjusted in the overview display for the
DHW circuit.
Action:
Purpose:
Examples:
Desired DHW temperature
50
Confi rm
Adjust the desired DHW
55
temperature
Confi rm
In addition to the information about desired
and actual DHW temperature, today's
schedule is visible.
Setting the desired room temperature,
ECA 30 / ECA 31
The desired temperature can be set as in the
controller. However, other symbols can be
present in the display (please see the page
about symbols).
Danfoss District Energy
Mode: Comfort
Actual
outdoor
temp.
Actual
room
temp.
Desired room temp.
The setting of the desired room
temperature is important even if a room
temperature sensor / Remote Control Unit
is not connected.
Mode: Scheduled
Actual
DHW
temp.
Desired DHW temp.
With the ECA 30 / ECA 31 you can override
the desired room temperature set in the
controller temporarily by means of the
override functions:
VI.KT.Y1.02
DEN-SMT/DK
7
Imprimir página