3T-Components 3T-MOTORS 3T45-10 Manual de instrucciones de instalación y funcionamiento - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Motor 3T-Components 3T-MOTORS 3T45-10. 3T-Components 3T-MOTORS 3T45-10 20 páginas. Shutter / awning motors with mechanical limit switches, for shafts from 60/40 mm
Imprimir página
INSTALLATION INSTRUCTIONS
Motor type 3T45
Installation with universal bearing or cover cap bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
•
and secure with safety pin.
Installation with cover cap bearing:
Remove screws from metal plate on motor head
•
Remove metal plate
>
fig. 2.2
•
Remove motor square spigot
>
fig. 2.3
•
Reattach metal plate
>
fig. 2.4
•
2.1
2.3
Slide motor type 3T45 without square spigot into cover cap bearing
•
and secure with both securing clips.
Cover cap bearing
Cotter pin
>
fig. 2.1
2.2
Square spigot
2.4
Securing clips
Motor type 3T35
Installation with universal bearing or clip bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
•
and secure with cotter pin.
Installation with clip bearing:
Remove screws from metal plate on motor head
•
Remove metal plate
>
fig. 2.6
•
Remove motor square spigot
>
fig. 2.7
•
Reattach metal plate
>
fig. 2.8
•
2.5
Square spigot
2.7
Engage motor type 3T35 without square spigot in clip bearing.
•
Clip bearing
Cotter pin
>
fig. 2.5
2.6
2.8
3T-MOTORS Tubular motors | Installation instructions
8