Casio 2747 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Ver Casio 2747. Casio 2747 3 páginas. Casio aw80d-1av: user guide
También para Casio 2747: Manual del usuario (3 páginas)

Imprimir página

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, or until you turn the alarm off.

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode digital time.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the

setting screen

SNZ

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal.

2. Press A to toggle it on and off.

• The indicators shown below appear on the display when the daily alarm and Hourly

Time Signal are turned on. Each indicator disappears when the corresponding

function is turned off.

Snooze alarm on

indicator

Hourly time signal

on indicator

• The above on indicators appear on the display in all modes.

• An on indicator on the display flashes while its corresponding alarm operation is

sounding.

• The snooze alarm on indicator flashes during the 5-minute intervals between

alarms.

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

Seconds

reaches zero.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the

Hours

Minutes

hour setting of the countdown start time starts to

flash,which indicates the setting screen.

2. Press C to move the flashing between the hour and minute settings.

3. While a setting is flashing, use D (+) and B (–) to change it.

• To set the starting value of the countdown time to 24 hours, set

4. Press A to exit the setting screen.

To use the countdown timer

Press D while in the Countdown Timer Mode to start the

countdown timer.

• When the end of the countdown is reached, the alarm

sounds for 10 seconds or until you stop it by pressing

any button. The countdown time is automatically reset to

its starting value after the alarm stops.

• Press D while a countdown operation is in progress to pause it. Press D again to

resume the countdown.

• To completely stop a countdown operation, first pause it (by pressing D), and then

press A. This returns the countdown time to its starting value.

• The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

Stopwatch

The stopwatch lets you measure elapsed time, split times,

Seconds

and two finishes.

• The display range of the stopwatch is 23 hours,

1/100

second

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

Hours

Minutes

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

To measure times with the stopwach

Elapsed Time

Start

Stop

Re-start

Split Time

Start

Split

Split release

Two Finishes

Start

Split

Stop

First runner

Second runner

finishes.

Display time of

first runner.

USER'S GUIDE 2747

Alarm 1

on indicator

Alarm 2

on indicator

0:00

Stop

Clear

Stop

Clear

Split release

Clear

Display time of

second runner.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Return Feature

• The watch automatically returns to the Timekeeping Mode if you do not perform any

button operation for two or three minutes in the Telememo, Alarm, or Hand Setting

Mode.

• If you leave a screen with flashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically exits the setting

screen.

• Holding down C for about one second in any mode jumps directly to the

Timekeeping Mode. This operation does not work while a setting screen is on the

display.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls through the data at high speed.

Initial Screens

When you enter the Telememo, World Time, or Alarm Mode, the data you were

viewing when you last exited the mode appears first.

World Time

• The UTC differentials associated with each city code are used to calculate World

Time Mode times, based on the time you set for any one of the World Time cities.

• The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

• The letters "UTC" is the abbreviation for "Coordinated Universal Time", which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth's

rotation.

Display Illumination Precautions

The light that illuminates the face uses two LEDs (light-emitting diode) and a light

guide panel that cause the display to glow for easy reading in the dark. In any mode

(except when a setting screen is on the display), press B to illuminate the display for

about one second.

• The illumination provided by the light may be hard to see when viewed under direct

sunlight.

• The light automatically stops illuminating whenever an alarm sounds.

• Frequent use of the light shortens the battery life.

Character List

City Code Table

City

UTC

City

Other major cities in same time zone

Code

Differential

PPG

PAGO PAGO

–11.0

HNL

HONOLULU

–10.0

PAPEETE

ANC

ANCHORAGE

–09.0

NOME

SAN FRANCISCO, LAS VEGAS, VANCOUVER, SEATTLE,

LAX LOS ANGELES

–08.0

DAWSON CITY

DEN

DENVER

–07.0

EL PASO, EDMONTON

HOUSTON, DALLAS/FORT WORTH, NEW ORLEANS,

CHI

CHICAGO

–06.0

MEXICO CITY, WINNIPEG

MONTREAL, DETROIT, MIAMI, BOSTON, PANAMA CITY,

NYC

NEW YORK

–05.0

HAVANA, LIMA, BOGOTA

CCS

CARACAS

–04.0

LA PAZ, SANTIAGO, PORT OF SPAIN

RIO

RIO DE JANEIRO

–03.0

SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO

– – –

–02.0

– – –

–01.0

PRAIA

LON

LONDON

+00.0

DUBLIN, LISBON, CASABLANCA, DAKAR, ABIDJAN

PAR

PARIS

MILAN, ROME, MADRID, AMSTERDAM, ALGIERS,

+01.0

BER

BERLIN

HAMBURG, FRANKFURT, VIENNA, STOCKHOLM

CAI

CAIRO

ATHENS, HELSINKI, ISTANBUL, BEIRUT, DAMASCUS,

+02.0

JRS

JERUSALEM

CAPE TOWN

JED

JEDDAH

+03.0

KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI

MOW

MOSCOW

THR

TEHRAN

+03.5

SHIRAZ

DXB

DUBAI

+04.0

ABU DHABI, MUSCAT

KBL

KABUL

+04.5

KHI

KARACHI

+05.0

MALE

DEL

DELHI

+05.5

MUMBAI, KOLKATA

DAC

DHAKA

+06.0

COLOMBO

RGN

YANGON

+06.5

BKK

BANGKOK

+07.0

JAKARTA, PHNOM PENH, HANOI, VIENTIANE

SINGAPORE, KUALA LUMPUR, BEIJING, TAIPEI, MANILA,

HKG

HONG KONG

+08.0

PERTH, ULAANBAATAR

TYO

TOKYO

+09.0

SEOUL, PYONGYANG

ADL

ADELAIDE

+09.5

DARWIN

SYD

SYDNEY

+10.0

MELBOURNE, GUAM, RABAUL

NOU

NOUMEA

+11.0

PORT VILA

WLG WELLINGTON

+12.0

CHRISTCHURCH, NADI, NAURU ISLAND

*Based on data as of December 2002.