Danfoss TS715 Si Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Termostato Danfoss TS715 Si. Danfoss TS715 Si 2 páginas. Underfloor heatig timeclock
También para Danfoss TS715 Si: Instrucciones de uso (2 páginas)

Imprimir página
Danfoss TS715 Si Instrucciones de uso
F. Running your Programme
To run the system: press the SELECT button (Fig. 10).
With each press of the SELECT button the display will change between ON, OFF,
ALLDAY and AUTO. Select the option you require depending on your circumstances,
time of the year etc (Fig. 11).
•
AUTO = the system will come on and go off at the programmed times
•
ON = the system will remain on constantly
•
OFF = the system will not come on
•
ALLDAY = the clock will turn the system on at the first programmed ON and will
leave it on until your last programmed OFF
G. Temporary Override Buttons
The grey buttons next to the display are the override buttons (Fig. 12).
+1HR = the system will remain on for an extra hour. If it is pressed whilst the programme
is off, the system will come on immediately for 1 hour then go off.
MAN = if this button is pressed when the system is on, then the system will go OFF
until the next programmed ON. If this button is pressed when the system is OFF, then
the system will come ON until the next programmed OFF.
NB. These over-rides are only temporary and do not affect the preset programmes.
H. Winter Time / Summer Time Clock
The change between winter and summer time is handled automatically and will occur
on the correct date in Spring and Autumn.
I. Service Interval Timer
If the property is owned by a landlord he may, for gas safety reasons, have instructed
the installer to set the service interval timer.
If set a visual and audible warning will alert you that the boiler will need servicing within
the next 28 days. This warning is repeated each day at noon. (Fig. 13)
If the boiler is not serviced within 28 days the daily audible warning will sound
continuously and can only be cancelled each day by pressing any button on the unit.
In addition, all overrides and programming buttons will be disabled and the heating
and hot water will only operate for 15 minutes in each programmed hour.
As this is a gas safety feature only an installer can reset the service interval timer. This
will be done as part of the boiler service.
Danfoss Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: 01234 364621
Fax: 01234 219705
Website: www.heating.danfoss.co.uk
Fig. 10
Fig. 11
Fig. 12
+1HR override
MAN override
Fig. 13
+1HR
MAN
Part No. 386 04/06