Danfoss vlt soft starter mcd 500 Manual de instrucciones de instalación - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Unidad de control Danfoss vlt soft starter mcd 500. Danfoss vlt soft starter mcd 500 17 páginas. Usb module
También para Danfoss vlt soft starter mcd 500: Manual de instrucciones de instalación (6 páginas), Instrucciones de instalación (5 páginas)
Imprimir página
Modbus Register
6. Modbus Register
Register
Address
Type
40002
Single Write
Command
40003
Multiple Read
Starter
status
40004
Multiple Read
Trip Code
1
40005
Multiple Read
Motor
current
40006
Multiple Read
Motor
temperature
40007
Multiple Read
Product Type
and Version
40008
Multiple Read
Serial
Protocol
Version
2
40009
~
Single Write
Parameter
and Multiple
management Read
Description
1 = Start
2 = Stop
3 = Reset
4 = Quick stop (coast to stop)
5 = Forced communication trip
Bit
Description
0 to 3
1 = Ready
2 = Starting
3 = Running
4 = Stopping (including braking)
5 = Restart delay (including
Temperature check)
6 = Tripped
7 = Program mode
8 = Jog forward
9 = Jog reverse
4
1 = Positive phase sequence (only valid if bit
6 = 1). Always = 0
5
1 = Current exceeds FLC
6
0 = Uninitialised
1 = Initialised
7
Always = 0
See Trip Code table.
Average 3 phase motor current (A)
Motor temperature (thermal model)
Bit
Description
0 to 2
Product parameter list version
3 to 7
1= MCD 3000
4= MCD 200
7 = MCD 500
Parameter 1-A (Motor FLC) to:
•
MCD 500 Par. 20-6 (Pedestal Detect)
•
MCD 3000 Par. 60 (Min Run Frequency)
MG.17.F5.02 - VLT® is a registered Danfoss trademark
MCD Modbus Module Instructions
4