Danfoss vlt soft starter mcd 500 Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Unidad de control Danfoss vlt soft starter mcd 500. Danfoss vlt soft starter mcd 500 6 páginas. Usb module
También para Danfoss vlt soft starter mcd 500: Manual de instrucciones de instalación (17 páginas), Instrucciones de instalación (5 páginas)

Imprimir página
Danfoss vlt soft starter mcd 500 Manual de instrucciones de instalación
Installation Instructions

4.5 Packing List

175G9007
1)
MCD 200
6 finger guards (rubber)
2 retaining brackets
1 installation instructions
–
–
–
–
Table 4.3 Packing List MCD 200, MCD 500 Enclosure Size G2, MCD 500 Enclosure Size G3B, and MCD 500 Enclosure Size G4B
175G5663
MCD 500 G3C enclosure size
3 finger guards (rubber)
1 finger guard cover
1 finger guard chassis
1 clamp plate
11 M4x10 screws
1 installation instructions
–
–
–
Table 4.4 Packing List MCD 500 Enclosure Size G3C, MCD 500 Enclosure Size G4C, and MCD 500 Enclosure Size G5C
1) Only 1 kit required.
2) Each kit is only sufficient for protection of either top or bottom cable terminals. If both top and bottom cable termination is used, 2 finger guard kits
are required.
MI17A602
Finger Guards
®
VLT
Soft Starter MCD 200/MCD 500
175G5662
1)
MCD 500 G2 enclosure size
6 finger guards (rubber)
2 retaining brackets
4 M4x10 screws
6 cable ties
1 installation instructions
–
–
175G5664
2)
MCD 500 G4C enclosure size
1 finger guard grille
1 finger guard cover
1 finger guard base chassis
2 finger guard side chassis
1 gland plate
6 M4x10 screws
12 M4x16 screws
2 M4 nuts
1 installation instructions
Danfoss A/S © 04/2016 All rights reserved.
175G5730
1)
MCD 500 G3B enclosure size
9 finger guards (rubber)
9 retaining brackets
2 finger guard plates
18 M4x14 screws
12 M4x12 screws
1 installation instructions
–
2)
1 finger guard grille
1 finger guard cover
1 finger guard chassis
1 gland plate
12 M4x10 screws
1 installation instructions
175G5731
MCD 500 G4B enclosure size
12 finger guards (rubber)
12 retaining brackets
2 finger guard bracket
2 finger guard cover
24 M4x16 screws
12 M4x12 screws
1 installation instructions
175G5665
2)
MCD 500 G5C enclosure size
–
–
–
1)
5