Danfoss APP series Manual de servicio - Página 4

Navegue en línea o descargue pdf Manual de servicio para Bomba de agua Danfoss APP series. Danfoss APP series 12 páginas. Disassembling and assembling
También para Danfoss APP series: Manual de servicio (12 páginas), Instrucciones de montaje y desmontaje (12 páginas), Instrucción (10 páginas)

Imprimir página

Disassembling and Assembling, APP 0.6-1.0

Service guide |

4 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

7. Remove the cylinder barrel.

9. Gently lever the valve plate assembly free

with the aid of a screwdriver.

11. Gently press, by hand, the valve onto the

cylinder barrel.

8. Remove the port plate and guide pin.

Mount backup

ring first

Then mount

O-ring

10. Replace the O-rings and the back-up rings

on the valve plate. Mount the new back-

up rings on the new valve plate first and

then mount the new O-rings.

Wet the O-rings and back-up rings with

clean (filtered) soap water.

12. Position the port plate over the guide pin.

IMPORTANT: Make sure that the guide

pin is located in the locating hole in the

port plate

Locating hole

Guide pin