Danfoss APP W HC 24 Manual de servicio - Página 10

Navegue en línea o descargue pdf Manual de servicio para Bomba de agua Danfoss APP W HC 24. Danfoss APP W HC 24 20 páginas. Disassembling and assembling

Imprimir página

Service guide | Disassembling and Assembling, APP 21 - 46 and APP W HC 15 -30

Disassembling and

assembling of the

swash plate

10 | 180R9406 | AX274339308034en-000302

WARNING:

Make sure that the surface on the swash

plate does not get any marks.

1. Place the swash plate upside down.

Remove the 2 bolts holding the swash

plate. Remove the mounting flange from

the swash plate.

3. Change the O-ring on the mounting

flange.

2. Check that the O-ring and pin are in good

condition (provided with seal set).

4. Mount the swash plate on the 2 pins.

Carefully by hand tilt the unit to

horizontal position and mount the 2 bolts

which hold the swash plate. Tighten the

bolts with a torqueaccording to exploded

view. Finally check the surface on the

swash plate for any marks or foreign

particles.

5. Mount the assembled part on the pump.