Dunkirk EXCELSIOR Series Instrucciones - Página 2
Navegue en línea o descargue pdf Instrucciones para Caldera Dunkirk EXCELSIOR Series. Dunkirk EXCELSIOR Series 4 páginas. Oil fired boiler, knockdown assembly
Imprimir página5.
Attach insulation to rear of boiler. Attach insulation
straps to rear strap with plastic buckles as shown in
3. Cut off excess strap material as shown.
Figure
6.
Insert brass bolts into threaded holes on front of boiler
as shown in
Figure
bolts will hold the side Jacket panels on the boiler.
KNOCKDOWN BOILER ASSEMBLY
Figure 3
4. Do not tighten down. These
Figure 4
7.
Place the Control Panel assembly on top of the boiler.
Let the burner wire harness hang down on the right
side of the boiler. See
8.
Attach the mini latches on the side jacket panels us-
ing the longer screws provided. See
9.
Place the side jackets on the brass bolts from step 6.
At the rear of the boiler, be sure the bottom fits over
the boiler and the top fits over the back plate flange
from step 2. Note the position of the burner wire har-
ness. See
Figure
2
Figure
4A.
Figure 4A
Figure 5.
Figure 5
6.