Danfoss PAH Series Instrucciones de montaje y desmontaje - Página 3
Navegue en línea o descargue pdf Instrucciones de montaje y desmontaje para Bomba de agua Danfoss PAH Series. Danfoss PAH Series 20 páginas. Pah 2-6.3/paht 2-6.3/paht c 2-6.3 and paht g 2-6.3 disassembling and assembling
También para Danfoss PAH Series: Manual de servicio (20 páginas), Manual de instrucciones (12 páginas)
Imprimir página
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
1.
Disassembling the
pump
1. Tools required for dismantling.
3. Dismantle the front cover using a vice.
5. Remove the two small O-rings from the
flange. Remove the seal from the front
cover using a screwdriver.
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
2. Remove the parallel key and unscrew the
front cover.
4. Remove the shaft seal using two
screw drivers.
Caution: Avoid scratching the sealing
surface on the shaft.
6. Unscrew the four screws for the housing.
3