Dunlop L.CRA.17D.C.M Manual de instalación - Página 8
Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Dunlop L.CRA.17D.C.M. Dunlop L.CRA.17D.C.M 20 páginas. Drw, double rear wheel drive and 4x4
Imprimir página
5 Instructions for installation
5.1 R ECO M M E N DED T IG H T ENING TO RQUE
During fitting of the air suspension system, it is recommended that nuts
and bolts are tightened in accordance with the following table...
METRIC TORQUE CHART IN N.m
SIZE
M6 x 1
M8 x 1.25
M10 x 1.5
M12 x 1.5
M16 x 2
T HE FO LLOW I NG INST R U CT IO NS MAK E REF ER ENCE TO TH E
D I AG RA M S O N PAG ES 16 TO 1 8 INCLUS I VE.
5 . 2 P RE PA RAT IO N
1.
Secure the front wheels, use wheel chocks on both sides of both front
wheels.
2.
Take the ground terminal from the battery when work to electricity
is involved.
3.
Lift the rear of the vehicle till there is working space of approximately
15 cm between bump stop and rear axle.
8 | INSTALLATION MANUAL | AUXILIARY AIR SUSPENSION | VOLKSWAGEN CRAFTER DRW AND 4X4 / MAN TGE DRW AND 4X4
IMPORTANT: Preparation and Precaution
Before beginning installation, ensure that you have sufficient clearance between the
axle and the chassis. Use a jack if necessary. Install at one side of the vehicle at a time.
Pay attention to your safety at all times during installation - always use axle stands
to support the vehicle!
The position of the axle stands should be under the chassis NOT under the axle!
CLASS 8.8
CLASS 10.9
9.9
14.0
24.0
34.0
48.0
67.0
61.0
89.0
200.0
285.0
IMPORTANT:
• When both the bolt and nut are
made from steel use either class
8.8 or 10.9
• For all other materials, tightening
torque is left to the discretion of a
person skilled in the art
FEB 2021