Casio FX-9750G Manual - Página 5

Navegue en línea o descargue pdf Manual para Calculadora Casio FX-9750G. Casio FX-9750G 9 páginas. 3. solve, differential/quadratic differential, integration, maximum/minimum value, and calculations
También para Casio FX-9750G: Manual del usuario (18 páginas), Anexo (10 páginas), Manual (12 páginas), Manual (19 páginas), Manual (13 páginas), Manual (10 páginas), Manual (16 páginas), Manual (12 páginas), Uso manual (12 páginas), Manual (11 páginas), Manual (14 páginas), Anexo (18 páginas), Manual (18 páginas), Manual (17 páginas)

Imprimir página

• Internal calculations are performed using a 15-digit mantissa, but results are dis-

played using a 10-digit mantissa and 2-digit exponent.

• This unit performs simultaneous linear equations by placing the coefficients in-

side of a matrix. Because of this, as the coefficient matrix approaches zero, pre-

cision in the inverse matrix is reduced and so precision in the results produced

also deteriorates. For example, the solution for a linear equation with three un-

knowns would be calculated as shown below.

• An "Ma ERROR" occurs whenever the unit is unable to solve the equations.

• Pressing 1 (REPT) returns to the initial display of the Linear Equation Mode.

Depending on the coefficients that you use, it may take considerable time for

the calculation result of simultaneous linear equations to appear on the dis-

play. Failure of a result to appear immediately does not mean that the unit is

not functioning properly.

k k k k k Changing Coefficients

You can change a coefficient either before or after you register it by pressing w.

u u u u u To change a coefficient before registering it with w

Press the A key to clear the current value and then input another one.

u u u u u To change a coefficient after registering it with w

Use the cursor keys to highlight the cell that contains the coefficient that you want to

change. Next, input the value that you want to change to.

k k k k k Clearing All the Coefficients

While in the Linear Equation Mode, press the 3 (CLR) function key. This operation

clears all the coefficients to zero.

3(CLR)

Linear Equations with Two to Six Unknowns

–1

1 2

7 - 2

4 5 6

119