AudioCodes MP-100 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Pasarela AudioCodes MP-100. AudioCodes MP-100 17 páginas.

AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide

March 2004

Setting Up the MP-104

Follow the instructions below to set up the MP-104.

To set up the MP-104:

Page 4 of 17

Attach the Ethernet cable to the ETH-1 RJ-45 connector to connect to your LAN. To

determine the configuration of the MP-104, connect the DC power supply and observe

the front panel light-emitting diodes (LEDs). For details on LED indicators, refer to the

MP-104 User's Manual & Installation Guide that is on the CD-ROM. The back view of

an MP-104 is shown below.

Attach up to four phone lines (e.g., loop start lines) to the RJ-11 connectors.

NOTE:

Up to 200 m (660 ft) of 24AWG twisted pair cable can be used for phone lines.

Create a new directory (e.g., Audiocodes MP_104) in the Windows Explorer on your

PC.

Detach and unzip the BootP and MP_104 zip files that are provided in the Inter-Tel

AudioCodes CD (part no. 827.9920) into this folder. You may want to create a sub-

folder for the BootP zip file within the same folder. The folder should look like the one

shown below.

Double-click Setup.exe (in the BootP folder) to install the AudioCodes BootP

server.