AudioCodes AC-HRS Manual de configuración rápida - Página 2
Navegue en línea o descargue pdf Manual de configuración rápida para Teléfono IP AudioCodes AC-HRS. AudioCodes AC-HRS 20 páginas. Huddle room solution
Imprimir página
3. Mounting the AC-HRS Device on a Desktop
Desktop: Slide the L-shaped stand's short or long edge slots onto these rails.
4. Cabling
Warning:
Prior to connecting power, refer to the Compliancy and Regulatory Information
document at https://www.audiocodes.com/library/technical-documents.
To cable the AC-HRS device:
Power Supply cable for HRS-457
Power Supply cable for the HRS-458 speaker and HRS main unit
1.
Connect the AC-HRS device's cord's short straight end to the handset and its longer straight end to
the device's handset jack.
2.
Connect the AC-HRS device's RJ-45 LAN port to the LAN network (LAN port or LAN switch/router)
with the CAT 5 / 5e Ethernet cable.
3.
Connect the AC-HRS device's RJ-45 PC port to a computer with the CAT 5 / 5e Ethernet cable.
4.
Connect one of the AC-HRS device's USB ports to the speaker, using the speaker's integral USB cable.
For Power-over-Ethernet (PoE) setups, make sure the AC-HRS device's other USB port is unused.
See the illustration and instructions below.
P a g e
| 2