AudioCodes Mediant 4000 Manual rápido - Página 2
Navegue en línea o descargue pdf Manual rápido para Controlador AudioCodes Mediant 4000. AudioCodes Mediant 4000 2 páginas. Enterprise session border controller (e-sbc)
Imprimir página
Mediant 4000 Enterprise Session Border Controller
7.
Open the IP Interfaces Table page (Configuration tab > VoIP > Network > IP Interfaces Table):
8.
Select the 'Index' radio button corresponding to the OAMP + Media + Control application type,
and then click Edit.
9.
Configure a LAN network address so that it corresponds to your network IP addressing scheme:
•
Interface Mode: IP addressing method (IPv4 or IPV6)
•
IP Address: IP address of the network interface
•
Prefix Length: Classless inter-domain routing (CIDR) representation style of a dotted-
decimal subnet notation (e.g., 16 is synonymous with subnet 255.255.0.0)
•
Gateway: IP address of the Default Gateway
•
VLAN ID: VLAN ID for this interface
•
Interface Name: Arbitrary descriptive string for this interface
•
Primary / Secondary DNS Server IP Address: IP address of the primary and secondary
Domain Name Server (DNS), if required
•
Underlying Interface: Physical Ethernet port group (Group Member) on which this network
interface operates
Note:
If you are deploying two Mediant 4000 E-SBC devices for High Availability (HA), you also
need to add a Maintenance network for HA. For more information, refer to the User's Manual.
10.
Click Apply and then click Done to apply and validate your network settings.
11.
Reset the Mediant 4000 E-SBC with a burn to flash of your new IP address settings. From the
Device Actions drop-down list on the toolbar, choose Reset, and then in the opened Maintenance
Actions page, click the Reset button.
11.
Disconnect the Mediant 4000 E-SBC from the computer and then connect the Mediant 4000 E-SBC
to the desired network.
Mediant 4000 Enterprise Session Border Controller
6
Obtaining Documentation and Software
If you are a registered user, you can obtain this quick guide and other relevant documentation and software
files from AudioCodes Website at http://www.audiocodes.com/downloads.
For access to all the relevant documentation and software files on the Website, ensure that you log in as a
registered user.
The table below lists the Mediant 4000 E-SBC related documentation:
Document
Description
Mediant 4000 E-SBC Hardware Installation
Provides a physical description of the Mediant 4000 E-SBC,
Manual
including mounting and cabling.
Mediant 4000 E-SBC User's Manual
Provides full configuration of the Mediant 4000 E-SBC.
Mediant 4000 Enterprise Session Border Controller
7
Customer Support
Customer technical support and service are generally provided by AudioCodes' Distributors, Partners, and
Resellers from whom the product was purchased.
For technical support for products purchased directly from AudioCodes, or for customers subscribed to
AudioCodes Customer Technical Support (ACTS), please contact [email protected].
©2013 AudioCodes Ltd. All rights reserved. AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI², CTI
Squared, HD VoIP, HD VoIP Sound Better InTouch, IPmedia, Mediant, MediaPack, NetCoder,
Netrake, Nuera, Open Solutions Network, OSN, Stretto, TrunkPack, VMAS, VoicePacketizer,
VoIPerfect, VoIPerfectHD, What's Inside Matters, Your Gateway To VoIP and 3GX are trademarks
or registered trademarks of AudioCodes Limited. All other products or trademarks are property of
their respective owners. Product specifications are subject to change without notice.
Quick Guide
Mediant 4000
Enterprise Session Border Controller (E-SBC)
LTRT-41563