AudioCodes Mediant 2600 Manual de configuración rápida - Página 4

Navegue en línea o descargue pdf Manual de configuración rápida para Hardware de red AudioCodes Mediant 2600. AudioCodes Mediant 2600 8 páginas. Session border controller

Imprimir página

1. Assigning an Ip Address

Connect the line socket of the AC power cord (supplied) to the device's AC power socket located on the

rear panel.

Connect the plug at the other end of the AC power cord to a standard electrical outlet.

Assigning an IP Address

Use the device's factory default IP address (192.168.0.2/24 and Default Gateway 0.0.0.0) to initially access the

device's Web-based management interface and then change it to suit your network's addressing scheme for

subsequent connectivity.

Using a CAT-5e/6 straight-through RJ-45 Ethernet cable, connect the device's Ethernet port GE #1

(front panel) to the LAN port on a computer.

Change the IP address of your computer to correspond with the device's default IP address and subnet

mask.

4 |

P a g e