Dupla MultiControl Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Acuarios Dupla MultiControl. Dupla MultiControl 16 páginas.
También para Dupla MultiControl: Manual de instrucciones (16 páginas)

Imprimir página

5.6

Set intervals

After the 9th programmable switching time, "

Press the "Menu" key to set the spacing of intervals, "00:" will ﬂ ash.

Use the ▲ or ▼ key to specify after how many hours an interval should be activated.

Acknowledge with "Menu", ":00" will ﬂ ash.

Use the ▲ or ▼ key to specify after how many minutes an interval should be activated. Acknowledge with

"Menu", "S-:00" will ﬂ ash.

Use the ▲ or ▼ key to specify after how many seconds an interval should be activated. Acknowledge with

"Menu", "00:" will ﬂ ash.

Use the ▲ or ▼ key to specify how many hours the interval should last.

Acknowledge with "Menu", ":00" will ﬂ ash.

Use the ▲ or ▼ key to specify how many minutes the interval should last.

Acknowledge with "Menu", "S-:00" will ﬂ ash.

To quit the sublevel of the switching times, hold down "Menu" to return to the switching menu.

Use the ▲ or ▼ key to change between the time-controlled slots and brieﬂ y press "Menu" to program further

switching times as per 5.5 or intervals as per 5.6.

Hold down "Menu" to leave programming of a time-controlled slot and scroll through to the next menu item

with the ▲ key.

Please note: Irrespective of the time of day, all programmed intervals start when the device is switched on or

the menu is quit. If a precise daytime control is required, set the switching time appropriately, e.g. at 2.30pm

for 5 seconds.

5.7

pH Program Set Point

Press the "Menu" key, "7.0" ﬂ ashes.

Set the required value with the ▲ or ▼ key.

Acknowledge with the "Menu" key, "Off" ﬂ ashes.

Use ▲ or ▼ to set button to "On" to activate pH display in toggle mode.

Note: Acknowledge with "Menu" - "Off" ﬂ ashes. Set to "On" if a pH electrode is connected. If pH electrode is

not connected, leave on "Off" to ensure that open input on controller does not display ﬁ cticious pH values in

normal or toggle mode.

Acknowledge with the "Menu" key to return to the main menu.

Scroll to the next menu item with the ▲ key.

" will ﬂ ash (see 5.5).