Audiocom Audiocom PS-2001L Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Fuente de alimentación Audiocom Audiocom PS-2001L. Audiocom Audiocom PS-2001L 16 páginas. Telex ps-2001l power supply: user manual
También para Audiocom Audiocom PS-2001L: Manuallines (7 páginas)
Imprimir páginaCHAPTER 2
Installation
Configuration Switches
The BAL/UNBAL switch (located on the rear of the unit) is set to the Balanced (Audiocom) position when the unit is shipped
from the factory. To set the switch to the Unbalanced (Clear-Com) mode, use a pointed object such as a pen to push in the
switch.
The Combine/Isolate switch (located on the front of the unit) can be changed at any time by using a pointed object such as pen
to push in the switch. When the switch is in the Combine position, all users on both channels may intercommunicate. When the
switch is set to the Isolate position, channels 1 and 2 cannot intercommunicate.
Intercom Channel and Program Connections
Channel Capacity:
When connecting intercom stations to the PS-2001L or SPS-2001, determine the total current for all stations on each channel.
The total per channel should no exceed 2A. If you exceed this limit, an overload indication will be provided and the output of
the power supply will be turned OFF. Once the overload is corrected, the overload indications will disappear and the power
supply output will be turned ON. Note, if you are using DC wallpacks with some intercom stations, you do not need to add the
current consumption of those station to the total current.
Audiocom Connections:
Intercom cable wiring details are shown in figure X. Speaker and interconnection cables (SPS-2001 Only) are standard RCA
phono types. For program input cable wiring, refer to your master intercom station user manual. Some typical applications are
shown in the figures on page 9.
Clear-Com Applications:
Refer to your Clear-Com system documentation for intercom cable wiring and connection details.
Desktop or Rackmount Installation
For desktop use, install the four supplied rubber feet to the bottom of the unit. Do not obstruct the cooling vents when using the
unit on a desktop.
7