AudioControl D-4.800 Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Amplificador AudioControl D-4.800. AudioControl D-4.800 18 páginas. High power multi channel amplifier with dsp matrix processor
También para AudioControl D-4.800: Manual de inicio rápido (17 páginas)
Imprimir página
Features
1
2
1. Fuses 40A- Replace these fuses only with the exact same style
and Ampere rating. Disconnect 12V power before changing or
inspecting the
fuses.
3
2. Power Input Terminal+ 12V - The left screw terminal connects
to the+ 12V battery binding post of the
vehicle.
Use good quality
insulated wire, between 8 and 3 gauge.
Power Input Terminal Ground - The right screw terminal
con-
nects to a good ground connection on the
vehicle.
Use good
qual-
ity insulated wire, between 8 and 3 gauge.
Remote Power Input Terminal - The middle screw terminal
connects to the 12V remote trigger output of some head units.
When the head unit is turned on, then the D-4.800 will turn
on.
Alternatively, you can use the GTO™ feature of the D-4.800 so it
will turn on when an audio signal is detected at the speaker-level
or line-level inputs of channels 1-2 (front).
4
5
6 7 8 9
3. RCA Analog Line-Level Inputs - The line-level output from the
head unit or factory-installed radios can connect here, so the
D-4.800 will receive the line-level audio signals.
4. RCA Analog Line-Level Outputs
-
These line-level analog
outputs from the D-4.800 connect to the line-level inputs of your
power amplifiers and other equipment. The matrix capabilities of
the D-4.800 allow you to pick and choose the outputs from any
combination of
inputs,
add crossovers and EQ as
required.
5. Speaker-Level Inputs - The speaker-level output from amplifiers
and factory installed radios can connect
here,
so the D-4.800 will
receive the audio signals this way and do its
thing.
Make sure that
you follow the plus and minus polarity markings on the D-4.800
and match it to the polarity of the speaker wiring. Speaker-level
Inputs 1-2 have the
GTO™
(great turn on) signal-sense circuit that
will awaken the D-4.800 when an input signal is present.
AudioContPOI®
Making
Good Sound Great
··
3