3Ware 9550SX Series Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Hardware informático 3Ware 9550SX Series. 3Ware 9550SX Series 4 páginas. Remote battery board
También para 3Ware 9550SX Series: Apéndice del manual del usuario (1 páginas)

Remote Battery Installation Guide
9
Insert the remote battery board in the chosen expansion slot and
secure the bracket with the screw you removed in step 2. (Note
that the remote battery board does not have a connector that
inserts into a slot on the motherboard).
Figure 3. Inserting the boards and connecting the battery power
to the BBU control module
10 Insert the battery power connector into the power receptacle on
the BBU control module, as shown above (Figure 3).
If you need a longer cable on the power connector, use the
extension cable to connect the battery to the power receptacle
on the BBU.
Note:
The battery will drain if it is plugged into the BBU and there
is no power to the unit. Wait to plug the battery into the BBU until
the system is ready for use.
Copyright ©2007 Applied Micro Circuits Corporation (AMCC). All rights reserved.
3ware®, 3DM® are registered trademarks of AMCC. The 3ware logo, 3BM, StorSave are all
trademarks of AMCC. All other trademarks herein are property of their respective owners.
While every attempt is made to make this document as accurate as possible, AMCC assumes
no responsibility for errors or omissions in the document and shall not be responsible or
liable for any and all damages, claims and/or disputes that arise from dependence on this
publication.
4
2
2
3
1
2
1
1
2
3
3
3