Audiodesign PAMX2 12/2UHF-2 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Mezclador Audiodesign PAMX2 12/2UHF-2. Audiodesign PAMX2 12/2UHF-2 4 páginas. Professional mixer with 2 wireless hand held microphones, usb and bt input

Imprimir página
Connections
&
Controls
ANT-B
AUX AUX
OUT
IN
28 29
27
PAMX2.12/2UHF-2
1
2
3
4
5
MAIN-AUX
OUT
6
7
8
USB-BT-AUX IN
9
10
MAIN-AUX OUT
11
1.
MIC 1: Balanced connection Jack or XLR for microphone or instrument.
2.
LINE: 2 stereo Jack connections (compatible with mono) for instruments or audio devices
3.
+ 4,8V: push-button to switch ON the 4,8 V Phantom power for XLR input and related LED. Button
must be OFF before connecting a microphone or when a dynamic microphone is connected. Before switching
on, turn off the Mic 1, Phone and Main potentiometers.
4.
PHONE: set the head phone level
5.
REPEAT: define the nr of effect repetition
6.
EFFECT: set the effect level
7.
DJH: set the DJH effects level
8.
HF/LF: set the high and low frequencies of AUX IN -- BT - USB inputs )
9.
HF/LF: set the high and low frequencies of Mic 1 - Mic2 and wireless Mic A and B inputs
10.
MAIN-AUX OUT: Slider to control the stereo output volume of MAIN OUT and AUX OUT
11.
MAIN-AUX OUT: If pushed mute the outputs
12.
Each of them, if pushed, mute the Mic 1 -Mic 2 (A and B), Line, USB-BT and Aux In
13.
5 Potentiometers to set the level of Mic 1 -Mic 2 (A and B), Line, USB-BT and Aux In
PAMX2 12/2UHF-2
ANT-A
USB 5V
26
31
30
24
25
AUX IN
MAIN OUT
22
23
21
20
EFF. ON/OFF
19
18
PEAK
17
EFF. ON/OFF
MIC PR.
16
15
14
A
B
C
D
USB-BT
AUX IN
USB-BT
AUX IN
12
13
6
Introduction
Introduction
Thank you for purchasing an AudioDesign-Pro PAMX2 12/2UHF-2, the new version of
our multi function mixer. This item combine an high quality and wide use flexibility mixer
to a couple of wireless UHF hand held microphones (10 Ch each).
Further features are:
* 2 Wired Microphone input
* 2 Stereo Aux Input
* USB reader and recorder
* DJ Effects (6 types)
* Main Stereo Output
Precautions:
Caution: When using any electric product , precautions should always be taken, including
the following:
1)
Read carefully all instructions before using the product.
2)
To reduce the risk, strict supervision is necessary when the product is used near
children.
3)
Don't use the product near to water sources like sinks, kitchens, wet floors, pools,
or similar or when raining.
4)
In case hearing losses or buzzing occur, please contact a doctor.
5)
This product should be site away from heat sources such as radiators or any
other product that generate heat.
6)
This product should be connected to a power supply line only of the type
described on the operating instructions. Check always the status of the power cable.
7)
Make sure that power switch can always be easily reached.
8)
DON'T operate on the product, except indications on the user's manual . Please
refer to authorized and qualified personnel for any other operation.
9)
Caution: Don't place objects on the product's power cable or place it in a position
where it could be damaged or cause interferences. Improper installation could cause fire
risk and/or personal injury.
Service
All Audio Design PRO products have been inspected and tested before leaving the factory
and , if properly used, they will work for many years. However, in case of any problem,
please proceed in the following way:
Contact your dealer and inform about the defect you found
In case it won't be possible to solve the problem with the dealer, the product needs to be
returned, preferably in its original packaging or in a proper packing to protect it during the
transport. Purchase documents must be produced too.
Your dealer will arrange the shipment to our service centre.
CE Conformity:
Audiodesign Pro products comply with presently existing directives and standards.
* 2 Line Input
* Bluetooth connection
* Effect on all Microphone input
* 4,8 V USB power
* Aux Stereo Output
3