AudioEngine A5+ Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Altavoces AudioEngine A5+. AudioEngine A5+ 9 páginas. Premium powered bookshelf speakers

Imprimir página

1. Setup and Operation

Other Features

Variable Output

The A5+ includes a variable preamp audio output so you can connect

a subwoofer, other Audioengine powered speakers, or an Audioen-

gine wireless adapter to daisy-chain music to other systems around

the house. This output is variable (adjustable) so the volume level

can be controlled from the A5+ front panel or remote control.

USB Power

The USB port allows you to power and charge your iDevice (iPod,

iPhone, iPad, etc.), Audioengine wireless adapters, or any USB-

powered product through the USB connector on the rear panel.

Note that this is for power only, not USB audio or data transfer.

Stand Mounting

Threaded 1/4"-20 brass inserts are included on the bottom of each

speaker cabinet to provide the ability to attach the speakers to free-

standing oor stands. These inserts, however, are not designed to

support the full weight of the speakers and therefore should not be

used with single-point wall or ceiling mounts.

Important Safety Note:

It is the customer's responsibility to check

with the stand manufacturer to determine whether that speci c

stand is capable of handling the weight and proportions of these

speakers in a safe and stable manner. The customer is also respon-

sible for proper selection of mounting hardware not included with

the speaker and for proper assembly. Audioengine disclaims any

liability for the selection of suitable oor stands and/or correct hard-

ware between the selected stand and these speakers.

For a complete list of product features and speci cations, go to:

www.audioengineusa.com

audioengine A5+ setup guide

Troubleshooting

• Verify that the AC power cord is firmly connected to the A5+ rear panel and to an

Front panel power

AC power outlet.

indicator is not

• Check that the AC power outlet is supplying power.

illuminated

• Verify that the rear panel power switch is in the ON position.

• Be sure the rear panel voltage selector matches the operating voltage in your area.

• Check the fuse in the rear panel. If the fuse needs to be replaced it is important to

replace with same fuse type and value.

• Verify that the A5+ and your source components are all powered on and the

Front panel indicator

volume levels are not set to minimum.

light is on solid, but

• Be sure the A5+ is not in MUTE or SLEEP mode (front panel indicator light

no sound

flashing)

• Check cables to and from your audio sources to make sure they are working and

firmly connected at both ends.

• Check speaker wire connections from the left (powered) speaker to the right

Sound through one

(passive) speaker. Confirm by removing the speaker wire from on each speaker

speaker only

and reconnecting.

• Check that the cables from your audio sources to the A5+ are properly

connected. Confirm by unplugging the audio cables and reconnecting.

• If using a computer, verify that the audio output balance setting is centered.

• Check speaker wire polarity by verifying that the wires are going to same

Lack of bass or

terminals on both speakers.

poor imaging

• Make sure the speakers are not too close to a wall or other obstruction, which

could limit bass output.

• Check the EQ or sound settings on your audio source.

• Decrease the volume level of the audio input source and increase the volume

If sound is distorted

of the speakers.

• Make sure nothing is blocking the remote receiver, which is in the left speaker.

Remote is not working

• Check the remote battery to be sure it is installed correctly.

or remote range is

• Replace the battery (see back of remote control for battery type and

reduced

replacement instructions)

audioengine A5+ setup guide